3.2x2.4mm SMD CHIP LED LAMP Part Number: APD3224QBC/D-F01 Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features z 3.2x2.4mm SMT LED, 2.4mm THICKNESS. z LOW POWER CONSUMPTION. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 1500PCS / REEL. The Blue source color devices are made with AlInGaN on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF0195 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203001070 Selection Guide Part No. Dice APD3224QBC/D-F01 Iv (mcd) [2] @ 20mA Lens Type Blue (AlInGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 480 900 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF0195 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203001070 Blue APD3224QBC/D-F01 SPEC NO: DSAF0195 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203001070 APD3224QBC/D-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF0195 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203001070 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF0195 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu APD3224QBC/D-F01 DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203001070