1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608MBC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS. The Blue source color devices are made with GaN on SiC z LOW POWER CONSUMPTION. Light Emitting Diode. z WIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. z IDEAL FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic z VARIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. z PACKAGE: 2000PCS / REEL . All devices, equipment and machinery must be electrically z MOISTURE SENSITIVITY LEVEL : LEVEL 3. grounded. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD0933 REV NO: V.4 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203005414 Selection Guide Part No. Dice APT1608MBC Lens Type Blue (GaN) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 4 10 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 430 nm IF=20mA Blue 466 nm IF=20mA Spectral Line Half-width Blue 60 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 135 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0933 REV NO: V.4 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203005414 Blue APT1608MBC SPEC NO: DSAD0933 REV NO: V.4 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203005414 APT1608MBC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD0933 REV NO: V.4 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203005414 PACKING & LABEL SPECIFICATIONS APT1608MBC SPEC NO: DSAD0933 REV NO: V.4 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203005414