4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP APKA4110MGC Features z4.1mm x 1.0mm RIGHT ANGLE SMT LED, 1.52mm THICKNESS. MEGA GREEN Description The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light zLOW POWER CONSUMPTION. Emitting Diode. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS/REEL. zRoHS COMPLIANT. Package Dimensions N ot es : 1. A l l di m ens i ons are i n m i l l i m et ers (i nc hes ). 2. T ol eranc e i s ±0. 25(0. 01" ) unl es s ot her wi s e not e d. 3. S pec i f i c at i ons a re s ubj e c t t o c hange wi t hout n ot i c e. SPEC NO: '6$D1194 REV NO: V.3 DATE: JUL/04/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000249-01 Selection Guide Part No. Dice APKA4110MGC Iv (mcd) @ 20mA Lens Type MEGA GREEN (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 36 100 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Mega Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 574 nm IF=20mA Mega Green 568 nm IF=20mA Spectral Line Half-width Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Mega Green Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: '6$D1194 REV NO: V.3 DATE: JUL/04/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000249-01 Mega Green APKA4110MGC SPEC NO: '6$D1194 REV NO: V.3 DATE: JUL/04/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000249-01 APKA4110MGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: '6$D1194 REV NO: V.3 DATE: JUL/04/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000249-01 PACKING & LABEL SPECIFICATIONS APKA4110MGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: '6$D1194 REV NO: V.3 DATE: JUL/04/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000249-01