LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only TAPE AND REEL TYPE LED LAMPS LDGM4341/TRS-X DATA SHEET DOC. NO : QW0905-LDGM4341/TRS-X REV : A DATE : 29 - Sep - 2005 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LDGM4341/TRS-X Page 1/5 Package Dimensions P2 ΔH H2 W2 H1 L W0 W1 W3 D P1 F P - + T 5.0 14.2 6.8 1.5 MAX 25.0MIN □0.5 TYP 2.54TYP 1.0MIN Note : 1.All dimension are in millimeter tolerance is ± 0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/5 PART NO. LDGM4341/TRS-X Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT DGM Forward Current IF 30 mA Peak Forward Current Duty 1/10@10KHz IFP 100 mA Power Dissipation PD 120 mW Reverse Current @5V Ir 50 μA Electrostatic Discharge ESD 150 V Operating Temperature Topr -20 ~ +80 ℃ Storage Temperature Tstg -30 ~ +100 ℃ Soldering Temperature Tsol Max 260 ℃ for 5 sec Max (2mm from body) Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO COLOR MATERIAL Emitted LDGM4341/TRS-X InGaN/GaN Green Luminous Peak Dominant Spectral Forward voltage intensity wave wave halfwidth length length △λ nm @20mA(V) @20mA(mcd) λPnm λDnm Typ. Max. Min. Typ. Lens Green Transparent Viewing angle 2θ 1/2 (deg) 518 525 36 3.5 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 4.0 550 1040 88 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LDGM4341/TRS-X Page3/5 •Dimensions Symbol Information OPTION SYMBOL CODE SYMBOL ITEMS SPECIFICATIONS Minimum Maximum mm inch mm inch Tape Feed Hole Diameter ------- D 3.8 0.15 4.2 0.17 Component Lead Pitch ------- F 2.3 0.09 3.0 0.12 Front-To-Rear Deflection ------- △H ------- ------- 2.0 0.08 17.5 21.5 25.5 22.5 19.9 24.0 24.5 19.0 18.0 21.0 20.5 18.0 26.5 0.69 0.85 1.0 0.89 0.78 0.94 0.96 0.75 0.72 0.84 0.81 0.72 1.04 18.5 22.5 26.5 23.5 20.9 25.0 25.5 20.0 19.4 22.0 21.5 19.0 27.5 0.73 0.89 1.04 0.93 0.82 0.98 1.0 0.79 0.76 0.88 0.85 0.76 1.08 ------- ------- 36 1.42 11.0 0.43 TRS-1 TRS-2 TRS-3 TRS-5 TRS-6 TRS-7 TRS-8 TRS-9 TRS-10 TRS-11 TRS-12 TRS-13 TRS-14 Feed Hole To Bottom Of Component Feed Hole To Overall Component Height H1 ------- H2 Lead Length After Component Height ------- L Feed Hole Pitch ------- P 12.4 0.49 13.0 0.51 Lead Location ------- P1 4.4 0.17 5.8 0.23 Center Of Component Location ------- P2 5.1 0.2 7.7 0.3 Overall Taped Package Thickness ------- T ------- ------- 1.42 0.06 Feed Hole Location ------- W0 8.5 0.33 9.75 0.38 Adhesive Tape Width ------- W1 14.5 0.57 15.5 0.61 Adhesive Tape Position ------- W2 0 0 4.0 0.16 Tape Width ------- W3 17.5 0.69 19.0 0.75 W0 REMARK: TRS=Tape And Reel Straight Leads • Package Dimensions • Dimensions Symbol Information Specification Description Symbol maxmum minimum mm inch mm inch Reel Diameter D 78.2 3.08 380 14.96 Core Diameter D1 34.9 1.37 102 4.02 Hub Recess Inside Diameter D2 28.6 1.13 88.0 3.46 Arbor Hole Diameter D3 13.8 0.54 38.1 1.5 Overall Reel Thickness T2 ------- ------- 57.2 2.25 Iside Reel Flange Thickness T1 30.0 1.18 50.0 1.97 Package Quantity/Reel LDGM4341/TRS-X 1000PCS D3 MARKING D2 D1 T1 T2 D Order Increments LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LDGM4341/TRS-X Page 4/5 Typical Electro-Optical Characteristics Curve DGM CHIP Fig.2 Relative Intensity vs. Forward Current Fig.1 Forward current vs. Forward Voltage 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 2.5 2.0 1.5 1.0 0.5 0.0 0.1 1.0 2.0 3.0 4.0 1.0 5.0 10 Fig.3 Forward Voltage vs. Temperature Fig.4 Relative Intensity vs. Temperature 1.2 3.0 Relative Intensity@20mA Normalize @25 ℃ Forward Voltage@20mA Normalize @25 ℃ 1000 Forward Current(mA) Forward Voltage(V) 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0.0 450 500 550 Wavelength (nm) 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 Ambient Temperature(℃) Ambient Temperature( ℃) Relative Intensity@20mA 100 600 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/5 PART NO. LDGM4341/TRS-X Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hous. Thermal Shock Test 1.Ta=105 ℃±5 ℃&-40 ℃±5 ℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11