FEATURES PROFESSIONAL LED INDICATORS Ø 8.1mm Mounting 502 SERIES PACK QUANTITY = 10 PIECES l Nickel plated brass housing l Sealed to IP67 l Water clear lens for good on/off contrast ratio l Internally potted for use in high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. l Wide viewing angle SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. PART NUMBER COLOUR LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS WAVE INTENSITY LENGTH lv@20mA (mcd) λp (nm) OPERATING TEMP Topr STORAGE TEMP Tstg HIGH INTENSITY 502-501-21 Red Water Clear 12 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 502-532-21 Green Water Clear 12 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 502-521-21 502-930-21 502-997-21 502-501-23 502-521-23 502-532-23 502-930-23 502-997-23 UNITS Yellow Blue Cool White Red Yellow Green Blue Cool White Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear 997F-C *Typical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 12 12 12 24-28 24-28 24-28 24-28 24-28 Vdc 20 20 20 20 20 20 20 20 mA 16000 7000 14000 11000 16000 23000 7000 14000 mcd 591 470 *see below 643 591 527 470 *see below nm -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ °C -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 °C Yes Yes Yes Yes Yes Yes Yes Yes Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Refer to page 3. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 014/08 Issue 2 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 1 of 3 502 Series 23.3 +0.1 6.0 Ø8.1 0 2.8 Ø7.0 Ø11.5 7.8 Mounting Hole Anode termination indicated by red sleeve Mounting hole to be clean and burr free. Dimensions in mm (Typical) Not to scale MATERIALS PUSH-ON CONNECTORS Body Bright Nickel Plated Brass Nut Bright Nickel Plated Brass Panel Seal Viton Termination Tags Silver Flash Coated Brass Lens Polycarbonate Encapsulation PC5430 resin Lock Washer Spring Steel 925-000-00 is brass tin plated. For use with 502 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES 502 UNITS MAXIMUM POWER DISSIPATION MAXIMUM REVERSE VOLTAGE PANEL CUTOUT mW Vdc mm 700 * = Current Version 3* / 1000• 8.1 NUT MOUNTING TORQUE MINIMUM MOUNTING CENTRES MIN/MAX. PANEL THICKNESS Nm mm mm 0.6 • = Voltage Version x,y = 14.5 1.5-13.0 OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY VOLTAGE WIRE COLOUR WIRE LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 150mm NO/DIAMETER OF CONDUCTORS DIAMETER OVER INSULATION 19/0.15mm 1.2mm COMMENTS Customised lengths available 1000mm website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 014/08 Issue 2 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 501 & 521 532, 930 & 997 ALSO AVAILABLE Part numbers also available in the 502 Series: PART NO. 502-501-20 502-501-86-19 502-521-20 COLOUR Red Red Yellow VOLTAGE DC (Vdc) Vopr 5/6 VDC 115 VAC 5/6 VDC 502-521-25 Yellow 110 VDC 502-532-20 Green 5/6 VDC 502-532-86 Green 502-521-86-19 502-532-24 502-532-86-19 Yellow Green Green 115 VAC 48 VDC 115 VAC 115 VAC 502-997-20 White 5/6 VDC 502-997-24 White 48 VDC 502-997-22 502-997-86 UNITS White White 24 VDC 115 VAC The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 014/08 Issue 2 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3