FEATURES PROFESSIONAL LED INDICATORS Ø12.7mm Mounting 515 SERIES PACK QUANTITY = 10 PIECES l Bright nickel plated brass housing l Atex approved to EN50028 (EN50014) l Sealed to IP67 l Wide viewing angle l Suitable for high vibration applications SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 515-501-04 Red Colour Diffused 2.6 20 11000 624 -40 ~ +95^ -40 ~ +100 Yes 515-521-04 Yellow Colour Diffused 2.8 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 515-532-04 Green Colour Diffused 4.1 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 515-930-04 Blue Colour Diffused 4.1 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 515-997-04 Cool White Colour Diffused 4.1 20 14000 * -40 ~ +95^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS * = Typical emission colour: cool white x=0.31, y=0.32 fig 1 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. ^ = Products must be derated when used above 45°C - Refer to fig 1. Max forward DC current vs ambient temperature (Tjmax=105°C) How to Order: website: www.marl.co.uk • email: [email protected] • webstore: www.leds.co.uk • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2006 : DS 039/06 Issue 1 SAMPLES AVAILABLE Page 1 of 2 515 Series Dimensions in mm (Typical) Anode termination indicated by red sleeve Not to scale MATERIALS Body Brass to BS 2874 CZ121 nickel plated BS 1224 Nut Brass to BS 2874 CZ121 nickel plated BS 1224 Panel Seal Viton Cable Zyrad 500 Fresnel lens Polycarbonate Clear Encapsulation Stycast 1264A / 1264B catalyst Blue Encapsulation Stycast 2850FT / 24LV catalyst TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM DISSIPATION VOLTAGE POWER REVERSE PANEL CUTOUT MOUNTING TORQUE MINIMUM MIN/MAX. CENTRES THICKNESS MOUNTING PANEL 515 1000 1000 12.7 1.0 x,y=19.5 1.5-5.0 UNITS mw Vdc mm Nm mm mm BODY LOCK Nickel Plated Zinc Plated Brass WASHER Steel website: www.marl.co.uk • email: [email protected] • webstore: www.leds.co.uk • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2006 : DS 039/06 Issue 1 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2