FEATURES PROFESSIONAL LED INDICATORS Ø12.7mm Mounting 651 SERIES PACK QUANTITY = 10 PIECES l Black anodised aluminium housing l Excellent wide viewing angle characteristics l Sealed to IP67 l Suitable for high vibration applications l Internal reverse protection diode fitted as standard in all voltage models SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg STANDARD INTENSITY 651-105-21 Red Colour Diffused 12 20 100 627 -40 ~ +85^ -40 ~ +85 Yes 651-111-21 Yellow Colour Diffused 12 20 50 590 -40 ~ +85^ -40 ~ +85 Yes 651-114-21 Green Colour Diffused 12 20 60 565 -40 ~ +85^ -40 ~ +85 Yes 651-105-23 Red Colour Diffused 24-28 20 100 627 -40 ~ +85^ -40 ~ +85 Yes 651-111-23 Yellow Colour Diffused 24-28 20 50 590 -40 ~ +85^ -40 ~ +85 Yes 651-114-23 Green Colour Diffused 24-28 20 60 565 -40 ~ +85^ -40 ~ +85 Yes HIGH INTENSITY 651-102-21 Red Colour Diffused 12 19 450 660 -40 ~ +85^ -40 ~ +85 Yes 651-102-23 Red Colour Diffused 24-28 19 450 660 -40 ~ +85^ -40 ~ +85 Yes Vdc mA mcd nm °C °C UNITS Fig 1 Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information - Refer to Fig 1 105,111,114 & 102 How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 044/06 Issue 2 SAMPLES AVAILABLE Page 1 of 2 651 Series MOUNTING HOLE Dimensions in mm (Typical) Anode termination indicated by red sleeve Not to scale Mounting hole to be cleaned and burr free MATERIALS PUSH-ON CONNECTORS Body Black Anodised Aluminium Nut Black Anodised Aluminium Panel Seal Viton Termination Tags Silver Flash Coated Brass Fresnel lens Epoxy Encapsulation PC5430 resin Lock Washer Spring Steel 925-000-00 is brass tin plated. For use with 651 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM DISSIPATION VOLTAGE 651 1000 3* / 1000• UNITS mw Vdc POWER * = Current Version REVERSE • = Voltage Version PANEL NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS 12.7 1.0 x,y = 19.5 1.5-8.0 mm Nm mm mm CUTOUT MOUNTING MOUNTING PANEL OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 044/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2