FEATURES PANEL INDICATOR LEDs - Ø6.35mm Mounting 315 SERIES PACK QUANTITY = 20 PIECES l Low profile lens styling l Flying lead terminations and low current versions l Sealed to IP40 l Supplied complete with mounting hardware l Product illustrated 315-532-21 available SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE OPERATING STORAGE LENGTH TEMP TEMP 627 -40 ~ +85^ -40 ~ +85 λp Topr Tstg STANDARD INTENSITY 315-505-21 Red Colour Diffused 12 20 60 Yes 315-506-21 Orange Colour Diffused 12 20 160 607 -40 ~ +85^ -40 ~ +85 Yes 315-511-21 Yellow Colour Diffused 12 21 40 590 -40 ~ +85^ -40 ~ +85 Yes 315-512-21 Green Colour Diffused 12 20 120 565 -40 ~ +85^ -40 ~ +85 Yes HIGH INTENSITY 315-501-21 Red Colour Diffused 12 20 2700 660 -40 ~ +85^ -40 ~ +85 Yes 315-521-21 Yellow Colour Diffused 12 20 6100 595 -40 ~ +85^ -40 ~ +100 Yes 315-532-21 Green Colour Diffused 12 20 11600 525 -30 ~ +85^ -40 ~ +100 Yes 315-930-21 Blue Colour Diffused 12 20 3460 470 -30 ~ +85^ -40 ~ +100 Yes 315-997-21 Cold White Colour Diffused 12 20 7800 *see below -30 ~ +85^ -40 ~ +100 Yes 315-501-23 Red Colour Diffused 24-28 20 2700 660 -40 ~ +85^ -40 ~ +85 Yes 315-521-23 Yellow Colour Diffused 24-28 20 6100 595 -40 ~ +85^ -40 ~ +100 Yes 315-532-23 Green Colour Diffused 24-28 20 11600 525 -30 ~ +85^ -40 ~ +100 Yes 315-930-23 Blue Colour Diffused 24-28 20 3460 470 -30 ~ +85^ -40 ~ +100 Yes 315-997-23 Cold White Colour Diffused 24-28 20 7800 *see below -30 ~ +85^ -40 ~ +100 Yes Vdc mA mcd nm 0 UNITS 997 *Typical emission colour cold white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.360 0.318 C C 0 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. Refer to page 3. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS077/07 Issue 1 SAMPLES AVAILABLE Page 1 of 4 315 Series 22.0 9.0 Ø6.3 Ø8.4 4.2 Ø6.35 0.7Sq 2.0 MOUNTING HOLE Dimensions in mm (Typical) Anode termination indicated by long tag. Not to scale MATERIALS PUSH-ON CONNECTORS Body Nylon 6 909-000-00 is gold plated Panel Washer Neoprene for use with 315 series. Termination Pins Tin on Nickel Plated Phosphor Bronze Retaining Clip Spring steel Fresnel lens Polycarbonate Header PTFE 910-000-00 is tin plated Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low resistance Dimensions in mm (Typical) and gas tight electrical Not to scale contact. TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM POWER DISSIPATION PANEL REVERSE CUTOUT VOLTAGE 315 500 3 6.35 UNITS mW Vdc mm MINIMUM MOUNTING MIN/MAX. PANEL CENTRES THICKNESS mm mm 13.0 9.0 OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 13 DC Products Red-anode / Black-cathode 150mm 13 AC Products Brown-live / Blue-neutral 150mm 17 DC Products Red-anode / Black-cathode 1000mm 17 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 7/0.2mm 1.2mm OF OVER COMMENTS Customised lengths available PROTECTION DIODE ORDER CODE SUFFIX CIRCUIT COMMENTS 01 Available on all indicators except Bi-Colour devices and when diode test is specified. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 077/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 4 Diode Test Facility ORDER CODE TERMINATION 03 3 PINS 09 1000mm of flying leads colours as shown SUFFIX 05 CIRCUIT 150mm of flying leads colours as shown 04 3 PINS 10 1000mm of flying leads colours as shown 06 150mm of flying leads colours as shown TEST POSITIVE TEST COMMENTS Not available with Bi-colour LED NEGATIVE Test Positive Test Negative Cathode Anode Test Anode Test Identification Cathode Identification Mark Mark De-rating Information 505, 511, 532, 930 & 997 512 & 506 521 501 How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 077/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 4 ALSO AVAILABLE Part numbers also available in the 315 Series: PART NO. COLOUR 315-501-04 Red 315-501-20-13 315-501-22 VOLTAGE PART NO. COLOUR 20mA 315-512-04 Green 20mA Red 5/6Vdc 315-512-20 Green 5/6Vdc Red 24Vdc 315-512-22 Green 24Vdc 315-501-71 Red 12Vac 315-512-22-03 Green 24Vdc 315-501-72 Red 24Vac 315-512-72 Green 24Vac 315-501-73 Red 28Vac 315-512-75 Green 110Vac 315-501-79 Red 30Vac 315-512-76-15 Green 230Vac 315-502-22 Red 24Vdc 315-512-76-19 Green 230Vac 315-502-72 Red 24Vac 315-521-04 Yellow 20mA 315-502-75 Red 110Vac 315-521-22 Yellow 24Vdc 315-503-20-50 Red 5/6Vdc 315-521-71 Yellow 12Vac 315-503-21 Red 12Vdc 315-532-04 Green 20mA 315-503-22 Red 24Vdc 315-532-20-13 Green 5/6Vdc 315-503-22-02 Red 24Vdc 315-532-22 Green 24Vdc 315-505-04 Red 20mA 315-532-72 Green 24Vac 315-505-22 Red 24Vdc 315-930-04 Blue 20mA 315-505-22-03 Red 24Vdc 315-930-22 Blue 24Vdc 315-505-72 Red 24Vac 315-930-25 Blue 110Vdc 315-506-22 Orange 24Vdc 315-997-04 White 20mA 315-509-24-03 Yellow 48Vdc 315-997-21-50 White 12Vdc 315-509-25 Yellow 110Vdc 315-997-22 White 24Vdc 315-511-04 Yellow 20mA 315-997-72 White 24Vac 315-511-22 Yellow 24Vdc 315-997-73 White 28Vac 315-511-72 Yellow 24Vac 315-997-79 White 30Vac (Vdc) Vopr UNITS VOLTAGE (Vdc) Vopr UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 077/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 4 of 4