ADD-155 155W Dual Output with Battery Charger(USP Function) series Features : Universal AC input / Full range Built-in active PFC function Protections: Short circuit / Overload / Over voltage Battery low/battery polarity protections Cooling by free air convection 100% full load burn-in test Fixed switching frequency at PFC 67KHz, PWM 134KHz 2 years warranty SPECIFICATION MODEL OUTPUT INPUT CH2 CH3 CH1 CH2 CH3 CH1 CH2 DC VOLTAGE 13.8V 5V 13.3V 27.6V 5V 27.1V 54V 5V 53.5V RATED CURRENT 9.5A 3A 0.5A 4.5A 3A 0.5A 2.3A 3A 0.2A CURRENT RANGE 0 ~ 10.5A 0 ~ 3A -------- 0 ~ 5A 0 ~ 3A -------- 0 ~ 2.5A 0 ~ 3A -------- RATED POWER 152.75W 100mVp-p -------- CH1: 12 ~ 14.5V VOLTAGE TOLERANCE Note.3 2.0% 3.0% OTHERS 149.9W -------- 200mVp-p -------- CH1: 24 ~ 29V 1.0% 3.0% 100mVp-p -------- 240mVp-p -------- CH1: 48 ~ 58V 1.0% 5.0% -------- 1.0% 0.5% -------- 1.0% 0.5% -------- 1.0% 0.5% -------- LOAD REGULATION 1.0% 2.0% -------- 1.0% 2.0% -------- 1.0% 2.0% -------- SETUP, RISE TIME 1000ms, 90ms/230VAC HOLD UP TIME (Typ.) 24ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.92 at full load EFFICIENCY (Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.5A/115VAC OVER VOLTAGE 2000ms, 90ms/115VAC at full load 20ms/115VAC at full load 124 ~ 370VDC 81% 81% 1.5A/230VAC COLD START 20A/115VAC <1mA / 240VAC 40A/230VAC CH1,CH2:105 ~ 135% CH3:0.51 ~ 0.9A rated output power Protection type : Constant current limiting, recovers automatically after fault condition is reoved CH1:31.74 ~ 37.26V CH1:62.1 ~ 72.9V CH1:15.87 ~ 18.63V BATTERY LOW Protection type : Shut down o/p voltage, re-power on to recover 19.5V(+1.5V,-1V ) 10V 0.8V WORKING TEMP. -10 ~ +60 39V 2V (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) on +5V ouput 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B / 70% RH HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 164.2K hrs min. MIL-HDBK-217F (25 ) 199*110*50mm (L*W*H) 1Kg; 16pcs/16Kg/0.95CUFT DIMENSION PACKING NOTE CH3 LINE REGULATION SAFETY STANDARDS WITHSTAND VOLTAGE (Note 4) 100mVp-p VOLTAGE ADJ. RANGE WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION EMC 152.75W RIPPLE & NOISE (max.) Note.2 150mVp-p OVERLOAD SAFETY & ADD-155C CH1 LEAKAGE CURRENT PROTECTION ADD-155B ADD-155A OUTPUT NUMBER 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:ADD-155-SPEC 2008-10-08 ADD-155 155W Dual Output with Battery Charger(USP Function) Mechanical Specification Case No. 906B series Unit:mm 192 5 172 3.5 12 6 100 1 9.5 2 3 97 110 4 8.2 5 6 5-M3 7 37 8 Terminal Pin No. Assignment 1 2 CN1 Pin No. 1 2 3 4 199 6 6.5 3.5 50 3M3 20 20 12 24.5 3.5 25 16.5 190.5 Assignment AC/L AC/N FG +5V Pin No. 5 6 7 8 Assignment BAT. + BAT. -/COM DC OUTPUT COM DC OUTPUT +V CN1 Pin No. Assignment :JST B2B-XH or equivalent Pin No. 1 2 Assignment Mating Housing RESET SW JST XHP or equivalent PFC fosc : 67KHz PWM fosc : 134KHz 159 SWITCHING REGULATOR Block Diagram Terminal JST SXH-001T-P0.6 or equivalent +5V BAT.CHARGER BACK UP EMI FILTER & RECTIFIERS I/P PFC CIRCUIT O.L.P. ACTIVE START CIRCUIT RESET +V -V RECTIFIERS & FILTER POWER SWITCHING FG B+ CONSTANT CURRENT LIMITING & DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage (A) 100 100 +13.8V 90 With 21.6 CFM min.(10cm) 80 80 70 With NO FAN LOAD (%) LOAD (%) 60 40 20 -10 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 88 90 100 120 140 160 180 200 220 240 260 INPUT VOLTAGE (V) 60Hz File Name:ADD-155-SPEC 2008-10-08