QP-320 320W Quad Output with PFC Function series ■ Features : $Universal AC input / Full range $Built-in active PFC function, PF>0.95 $Protections: Short circuit / Overload / Over voltage / Over temperature $CH1 & CH2 can be adjusted from -5% ~ +10% $With power good and fail signal output $Built-in remote sense function for CH1 & CH2 $LED indicator for power on $100% full load burn-in test $20A peak load capability for 24V channel $3 years warranty .. SPECIFICATION MODEL OUTPUT QP-320D QP-320F OUTPUT NUMBER CH1 CH2 CH3 CH4 CH1 CH2 CH3 DC VOLTAGE 5V 12V 24V -12V 5V 15V 24V -15V RATED CURRENT 20A 10A 3A 2A 20A 8A 3A 1.6A CURRENT RANGE 2.5 ~ 20A 0 ~ 10A 0.2 ~ 5A 0.2 ~ 2A 2.5 ~ 20A 0 ~ 10A 0.2 ~ 5A 0.2 ~ 1.6A PEAK CURRENT 20A 10A 20A,≦1ms(Note5) 2A 20A 10A 20A,≦1ms(Note5) 1.6A RATED POWER 316W 150mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p CH4 VOLTAGE ADJ. RANGE CH1,2:+10,-5% ± 3.0% VOLTAGE TOLERANCE Note.3 ± 3.0% INPUT +10,-6% ± 10% ± 3.0% ± 3.0% +10,-6% ± 10% LINE REGULATION ± 1.0% ± 2.0% ± 2.0% ± 3.0% ± 1.0% ± 2.0% ± 2.0% ± 3.0% LOAD REGULATION ± 2.0% ± 3.0% ± 6.0% ± 8.0% ± 2.0% ± 3.0% ± 6.0% ± 8.0% SETUP, RISE TIME 800ms, 50ms at full load HOLD UP TIME (Typ.) 16ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 83% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 4A/115VAC 25A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE 127 ~ 370VDC PF>0.98/115VAC at full load 2A/230VAC 45A/230VAC <2mA / 240VAC 105 ~ 150% rated output power Protection type : Fold back current limiting, recovers automatically after fault condition is removed CH1:5.75 ~ 6.75V CH2:13.8 ~ 16.2V CH1:5.75 ~ 6.75V CH2:17.25 ~ 20.25V Protection type : Shut down o/p voltage, re-power on to recover 95℃± 5℃ (TSW1 )detect on heatsink of power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 10ms/1ms POWER GOOD / POWER FAIL -10 ~ +70℃ (Refer to output load derating curve) WORKING TEMP. OVER TEMPERATURE FUNCTION WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH ± 0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B (Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 213.5K hrs min. MIL-HDBK-217F (25℃) 215*115*50mm (L*W*H) 1.2Kg; 12pcs/15.4Kg/0.92CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Every output channel can provide up to the maximum current, but total load can't exceed the rated output power. 5. CH3(24V) peak current 20A,≦1ms, repeatable in every 100ms. CH3(24V) output must be above 16V in the period of peak current. File Name:QP-320-SPEC 2007-10-25 QP-320 320W Quad Output with PFC Function Mechanical Specification Case No. 912I series Unit:mm 117.5 32.5 27.5 19 150 177.5 115 95 50 6-M3 L=3mm 16 8 36.5 4-M4 L=5mm 32.5 37.5 50.5 9 8 7 6 5 4 3 2 1 V2 V1 ADJ. 10 1 135 9.5 CN2 36.7 LED 6 Terminal Pin No. Assignment 15 215 150 CL 32.5 25 50 13 max. Air flow direction Pin No. Assignment Pin No. 1 AC/L 5 2 AC/N 6 3 FG 7,8 4 DC OUTPUT V4 9 Assignment DC OUTPUT V3 DC OUTPUT V1 DC OUTPUT COM DC OUTPUT V2 DC Output Connector (CN2) : JST S6B-XH-A-1 or equivalent Terminal Pin No. Assignment Pin No. Assignment Mating Housing 1 V1(+S) 4 V2(-S) JST SXH-001T-P0.6 JST XHP 2 V1(-S) 5 PF/PG or equivalent or equivalent 3 V2(+S) 6 GND 6-M4 L=5mm fosc : 100KHz RECTIFIERS & FILTER Block Diagram POWER SWITCHING RECTIFIERS & PFC EMI FILTER I/P V4 RECTIFIERS & FILTER V3 RECTIFIERS & FILTER MA & CONTROL PWM CONTROL PF/PG V2 PF/PG RECTIFIERS & FILTER O.L.P. V1 COM O.V.P. O.T.P. DETECTED CIRCUIT Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 70 LOAD(%) LOAD (%) 60 40 20 -10 -10 0 0 10 20 30 40 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 60 50 40 90 105 115 135 155 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:QP-320-SPEC 2007-10-25