T Series Crystal Spec ¾ 3.2mm X 2.5mm SMD ¾ Wide Frequency Range ¾ RoHS Compliant ¾ Tight Tolerance and Stability ESR CHART: ELECTRICAL SPECIFICATIONS: Frequency Range Frequency Tolerance / Stability Operating Temperature Range Storage Temperature Aging Shunt Capacitance Load Capacitance Equivalent Series Resistance (ESR) Drive Level Insulation Resistance 13.000MHz to 55.000MHz (See Part Number Guide for Options) ESR (Ohms) 100 Max 80 Max 60 Max Frequency Range 13.000MHz to 20.000MHz 20.000MHz to 30.000MHz 30.000MHz to 55.000MHz (See Part Number Guide for Options) -40°C to +85°C ±5ppm / first year max 5pF Max (See Part Number Guide for Options) See ESR Chart Mode / Cut Fund / AT Fund / AT Fund / AT MARKING: Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant 10µW Typ / 100µW Max 500 Megaohms Min at 100VDC ±15VDC MECHANICAL DETAILS: PIN 1 2 3 4 CONNECTION CRYSTAL NC CRYSTAL NC 3.45 [.136] MAX 0.75 [.030] MAX 2.00 [.079] 2.75 [.108] MAX 1 2 4 3 2.12 [.083] 1.70 [.067] 1.60 [.063] 1.20 [.047] 0.91 [.036] 1.12 [.044] 1.50 [.059] RECOMMENDED LAND PATTERN DIMENSIONS IN BRACKETS ARE IN INCHES PART NUMBER GUIDE: T 1 Frequency 3.2mm x 2.5mm 4 pads Load Capacitance XX = XXpF (9pF to 50pF) Temperature Tolerance/Stability B = ±30 ppm / ±50 ppm F = ±30 ppm / ±30 ppm G = ±10 ppm / ±30 ppm N = ±10 ppm / ±10 ppm P = ±20 ppm / ±20 ppm Operating Temperature A = 0°C to +70°c B = -20°C to +70°c C = -40°C to +85°c D = -10°C to +60°c E = -10°C to +70°c Packaging Mode of Operation 1 = Fundamental Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Deparment for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision T031008D