I Series Crystal 6.0mm x 3.5 mm 2 Pads Ceramic Package Tight Tolerance and Stability Wide Frequency Range Tape and Reel Packaging Frequency Range Frequency Tolerance / Stability Operating Temperature Range Storage Temperature Aging Shunt Capacitance 10.000MHZ to 80.000MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -40°C to +85°C ±5ppm per year max 7pF max Load Capacitance 20pF Standard (See Part Number Guide for Options) Equivalent Series Resistance Mode of Operation Drive Level Insulation Resistance See ESR Chart Fundamental / 3rd OT 100µW max 500 M ohms min at 100VDC ±15VDC ESR Chart ESR (Ohms) Mode / Cut 10.000MHZ to 10.999MHZ Frequency Range 100 max Fund / AT 11.000MHZ to 11.999MHZ 80 max Fund / AT 12.000MHZ to 15.999MHZ 60 max Fund / AT 16.000MHZ to 39.999MHZ 40 max Fund / AT 40.000MHZ to 80.000MHZ 70 max 3rd OT/ AT Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Marking Detail Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. 09/01/10 G Pg 1 of 2 Part Number Guide 6mm X 3.5mm x 1.2mm 2 Pads Temperature Tolerance/Stability* A = ±50 ppm / ±100 ppm B = ±30 ppm / ±50 ppm C = ±15 ppm / ±30 ppm D = ±10 ppm / ±15 ppm E = ±50 ppm / ±50 ppm F = ±30 ppm / ±30 ppm Load Capacitance S = Series 20 = 20pF (Standard) XX = XXpF (8pF to 50pF) Frequency I Mode of Operation 1 = Fundamental 3 = 3rd Overtone Operating Temperature A = 0°C to +70°C B = -20°C to +70°C C = -40°C to +85°C ** D = -10°C to +60°C Value Added Options Blank = No Added Options T = Tape and Reel * Please consult with MMD sales department for any other parameters or options. ** Not all Frequency Tolerance/Stability options available at this temperature range. Mechanical Details 6.20 [.244] MAX MXX.XXX SYMCCL 1.20 [.047] MAX 1.70 [.067] 1.00 [.039] 3.70 [.146] MAX 1.80 [.071] 1.40 [.055] 3.60 [.142] 1.00 [.039] Dimension in Brackets are in Inches Suggested Land Pattern Tape & Reel PITCH TAPE WIDTH REEL DIA Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 12.00 [.472] 180[7 IN] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. 09/01/10 G Pg 2 of 2