J Series Crystal 5mm X 3.2mm X 4 Pads Ceramic Package Wide Frequency Range Tight Tolerance and Stability Tape and Reel Packaging Available Frequency Range 8.000MHZ to 50.000MHZ Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature -40°C to +85°C Aging ±3ppm per year max Shunt Capacitance 7pF Max Load Capacitance (See Part Number Guide for Options) Equivalent Series Resistance See ESR Chart Mode of Operation Fundamental Drive Level 100µW Typical Insulation Resistance 500 Megaohms Min at 100VDC Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Marking Detail Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. 12/23/11 H Pg 1 of 2 ESR Chart Frequency Range 8.000MHz to 12.000MHz ESR (Ohms) Mode / Cut 70 Max Fund / AT 12.000MHz to 16.000MHz 70 Max Fund / AT 16.000MHz to 30.000MHz 60 Max Fund / AT 30.000MHz to 50.000MHz 40 Max Fund / AT Part Number Guide J 5mm X 3.2mm x 1.2mm 4 Pads 1 Frequency Value Added Options Blank = No Added Options T = Tape and Reel Temperature Tolerance/Stability* A = ±50 ppm / ±100 ppm B = ±30 ppm / ±50 ppm C = ±15 ppm / ±30 ppm** E = ±50 ppm / ±50 ppm F = ±30 ppm / ±30 ppm Load Capacitance S = Series 16 = 16pF (Standard) XX = XXpF (8pF to 50pF) Operating Temperature A = 0°C to +70°C B = -20°C to +70°C C = -40°C to +85°C ** Mode of Operation 1 = Fundamental * Please consult with MMD sales department for any other parameters or options. ** Not all Frequency Tolerance/Stability options available at this temperature range. Tape & Reel Mechanical Details PITCH 5.20 [.205] MAX 1.20 [.047] MAX 2.60 [.102] TAPE WIDTH MXX.XXX SYMCCL 3.40 [.134] MAX 3 4 2 1 1.40 [.055] 0.90 [.035] 1.20 [.047] PIN 1 INDICATOR DIMENSION IN BRACKETS ARE IN INCHES Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 REEL DIA 3.40 [.134] 2.20 [.087] 1.20 [.047] PIN PIN PIN PIN PIN CONNECTIONS CRYSTAL 1 NO CONNECTION 2 CRYSTAL 3 NO CONNECTION 4 2.00 [.079] DIRECTION OF FEED PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 12.00 [.472] 178[7 IN] 1000 or 3000 Q1 or Q4 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. SUGGESTED LAND PATTERN MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. 12/23/11 H Pg 2 of 2