IHB60SC 60 Watt Single Output Half Brick DC/DC Converter OBSOLETE PRODUCT Contact factory for replacement model RoHS Compliant 18 - 40 & 33 - 75V Input Range High Efficiency: 84% Typical 1500VDC Isolation Between Input and Output Operation to 100oC Baseplate Temperature 50MS Transient Recovery, 0-90% Load Step Primary & Secondary Remote On/Off Adjustable Output Voltage IHB60S Series Approved to UL/CUL 1950, EN60950 The IHB60SC series standard half-brick modules are designed for today’s demanding industrial applications. Available in two wide range inputs, these isolated converters offer many features in the standard models. With a complement of safety agency approvals and low noise operations, the converters respond extremely fast to change in load conditions. Inherent in the design are very well-controlled output voltages and no need for minimum loading. ISO9001 CERTIFIED PRODUCT SELECTION CHART MODEL INPUT VOLTAGE (VDC) RATED VOUT (VDC) RATED MAXIMUM I OUT (A) IHB60S2403C IHB60S2405C IHB60S4803C IHB60S4805C 24 (18-40) 24 (18-40) 48 (33-75) 48 (33-75) 3.3 5.1 3.3 5.1 18 12 18 12 ABSOLUTE MAXIMUM RATINGS EFFICIENCY vs TEMPERATURE TCASE = +40°C, nominal input voltage, nominal load, recommended external components applied, unless otherwise specified. Baseplate Temperature +100°C Storage Temperature +125°C Input to Output Isolation 1500 VDC Change in Efficiency (%) Output Short-Circuit Duration Continuous Case Temperature (°C) SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. PARAMETER INPUT Voltage Range IHB60S24XC Series IHB60S48XC Series Reflected Ripple Current Input Ripple Rejection Maximum Input Current IHB60S24XC Series IHB60S48XC Series No Load Power Dissipation Inrush Charge IHB60S24XC Series IHB60S48XC Series Quiescent Operating Current Primary On/Off Disabled Secondary On/Off Disabled PARAMETER GENERAL ISOLATION Input to Output Input to Baseplate Resistance, Input - Output Capacitance, Input - Output Leakage Current GENERAL Set Point Accuracy Turn-on Time Remote On/Off Control Inputs Primary Sink Current-Logic Low Vlow Vhigh Secondary Sink Current-Logic Low Vlow Vhigh External Synchronization Input Frequency Pulse Width Source Impedence Input High Voltage Input Low Voltage Input Impedance Switching Frequency Weight TEMPERATURE Operation/Specification Storage Shutdown Thermal Inpedance CONDITIONS Peak - Peak DC to 1KHz Output Power = 60W VIN = 16V VIN = 30V POUT = 0, VIN, Min<VIN<VIN, Max MIN TYP MAX UNITS 18 33 24 48 40 75 220 50 60 VDC VDC mA dB 6 3 6 A A W 0.29 0.165 mC mC 7.5 15 10 25 mA mA TYP MAX UNITS CONDITIONS MIN Peak Test 1500 1500 10 VISO = 240VAC, 60Hz 2000 180 VIN = Nominal, IO=INom Within 1% of Nominal VOUT 3.5 Open Collector/Drain VIN = VMAX VDC VDC M7 pF MA, rms 1 5 % mSec 7 0.8 Open Collector mA V 100 0.4 Open Collector MA V 520 320 47 5 1 KHz nSec 7 V V 7 KHz oz (g) Open Collector/Drain 440 150 4 0 470 470 480 490 3 (85) Case Temperature -40 -55 +100 Case to Ambient IHB60SC +100 +125 +115 8.2 REV A (RoHS) 04/2006 oC °C °C °C/W 2 SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. IHB60SX03C** OUTPUT PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency IHB60SX05C** OUTPUT PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency VOUT CONDITIONS Min 60 Watts Max IO Nom 0 DC to 20MHz* * Nom 30 3.3 9.0 100 3.15 .02 Max 60 18.0 200 3.80 .05 UNITS W V A mV V %/°C VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 0.05 0.50 23 19 0.10 1.00 150 35 250 50 5.0 25 % % A A 50 to 100% Load Step VOUT, 1% of VOUT, Nom 4.2 83 VIN=NOM, IO=18A 84 mV MSec V % VOUT CONDITIONS Min 60 Watts Max IO Nom 0 DC to 20MHz* * Nom 30 5.1 6.0 100 4.60 .02 Max 60 12 200 5.50 .05 UNITS W V A mV V %/°C VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load 0.05 0.50 16.0 12.6 0.10 1.0 200 35 300 50 6.8 16.0 % % A A 50 to 100% Load Step VOUT, 1% of VOUT, Nom 6.0 86 VIN=NOM, IO=12A 87 mV MSec V % *See Application Notes available on the web at www.murata-ps.com **X = Either 24 or 48 THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. IHB60SC REV A (RoHS) 04/2006 3 MECHANICAL PIN SIDE DOWN SIDE VIEW PIN CONNECTIONS PIN SIDE UP 1 2 3 4 5 6 PRIMARY ON/OFF -VIN +VIN SYNC IN TRIM -VOUT 7 8 +VOUT SECONDARY ON/OFF NOTES: All dimensions are in inches (millimeters). PIN PLACEMENT TOLERANCE: ± 0.005" MECHANICAL TOLERANCE: ± 0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is matte tin 100 microinches min., over nickel, 40-80 microinches. Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 USA: Mansfield (MA), Tel: (508) 339 3000, email: [email protected] Canada: Toronto, Tel: (866) 740 1232, email: [email protected] UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] www.murata-ps.com email: [email protected] ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. Singapore: Parkway Centre, Tel: +65 6348 9096, email: [email protected]