PS7111-2A PS7111L-2A 8 PIN DIP SOLID STATE RELAY FEATURES DESCRIPTION • 2 CHANNEL TYPE: (1a + 1a output) PS7111-2A and PS7111L-2A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOSFETs on the (output side). They are suitable for analog signal control because of their low offset and high linearity. • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE: 8 pin DIP • LOW OFFSET VOLTAGE • SURFACE MOUNT TYPE LEAD: PS7111L-2A APPLICATIONS • LOW LED OPERATING CURRENT: IF = 2 mA • EXCHANGE EQUIPMENT • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER MOS Diode FET SYMBOLS UNITS VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA ILOFF Off-State Leakage Current, VD = 100 V COUT Output Capacitance, VD = 0 V, f = 1 MHz IFon Coupled PS7111-2A, PS7111L-2A PARAMETERS LED On-state Current, IL = 100 mA MIN TYP MAX 1.2 1.4 5.0 µA 0.03 pF/ch 57 1.0 mA RON1 On-State Resistance, IF = 10 mA, IL = 10 mA RON2 On-State Resistance, IF = 10 mA, IL = 100 mA, t≤10 ms tON tOFF Turn-on Time1 Turn-off Time1 RI-O Isolation Resistance, VI-O = 1.0 kVCC CI-O Isolation Capacitance, V = 0 V, f = 1 MHz IF = 10 mA, VL = 5 V, RL = 500 Ω, PW ≥ 10 ms 2.0 Ω 3.0 6.0 ms 0.1 0.03 0.4 0.2 Ω 109 pF/ch 1.1 Note: 1. Test Circuit for Switching Time PS7111-2A, PS7111L-2A 8 7 6 5 1 2 3 4 IF Pulse Input VL Input 50% 0 Input Monitor VO Monitor Rin RL VO = 5 V 90% Output 10% ton toff California Eastern Laboratories PS7111-2A, PS7111L-2A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF VR PD IFP MOSFET VL IL ILP PD Coupled BV PT TA TSTG PARAMETERS UNITS RATINGS mA V mW/ch A 50 5.0 50 1 V mA mA 100 100 300 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) PART NUMBER Forward Current (DC) Reverse Voltage Power Dissipation Peak Foward Current2 Break Down Voltage Continuous Load Current Pulse Load Current3 (AC/DC Connection) Power Dissipation PS7111-2A,PS7111L-2A SYMBOLS PARAMETERS IF LED Operating Current VF LED Off Voltage UNITS mA V MIN TYP MAX 2 10 20 0 0.5 ORDERING INFORMATION PART NUMBER PS7111-2A PACKAGE PACKING STYLE 8 pin DIP Magazine case 50 pcs PS7111L-2A mW/ch 375 PS7111L-2A-E3 Embossed Tape 1000 pcs/reel PS7111L-2A-E4 Isolation Voltage4 Total Power Dissipation Operating Ambient Temp. Storage Temperature V mW °C °C 1500 850 -40 to +80 -40 to +100 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. PW = 100 ms, 1 shot. 4. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. OUTLINE DIMENSIONS (Units in mm) PS7111-2A PS7111L-2A TOP VIEW 9.25±0.5 8 7 6 5 1 2 3 4 TOP VIEW 9.25±0.5 8 7 6 5 1 2 3 4 3.5±0.3 6.5±0.5 3.5±0.3 4.15±0.3 7.62 6.5±0.5 +0.10 0.10 -0.05 1.34±0.1 2.54 0.9±0.25 9.60±0.4 3.3±0.3 1.34 ± 0.10 2.54 0.25 M 0.50 ± 0.10 0 to 15 ˚ 1. 2. 3. 4. 5. 6. 7. 8. LED Anode LED Cathode LED Anode LED Cathode MOSFET MOSFET MOSFET MOSFET 1. 2. 3. 4. 5. 6. 7. 8. LED Anode LED Cathode LED Anode LED Cathode MOSFET MOSFET MOSFET MOSFET PS7111-2A, PS7111L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 150 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 80 100 50 0 -25 100 0 25 50 80 75 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. SUPPLY VOLTAGE 1.6 100 250 1.4 IF = 50 mA 30 mA 20 mA 10 mA 1.2 5 mA 1.0 1 mA 0.8 -25 0 25 50 75 Output Capacitance, (pF) Forward Voltage, VF (V) f = 1 MHz 200 150 100 50 0 100 Ambient Temperature, TA (°C) 60 80 100 120 ON-STATE DISTRIBUTION 30 3.0 Normalized to 1.0 at TA = 25°C, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 n = 50 pcs IF = 10 mA IL = 10 mA 25 Number (pcs) Normalized On-State Resistance, RON 40 Supply Voltage, VCC (V) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 0 -25 20 20 15 10 5 0 25 50 75 Ambient Temperature, TA (°C) 100 0 2.8 2.9 3.0 On-State Resistance, Ron (Ω) PS7111-2A, PS7111L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE IF = 10 mA 10 10 10 10 10 10 -4 100 -5 Load Current, IL (mA) Off-State Leakage Current, ILOFF (A) 10-3 TA = 80 °C -6 -7 TA = 25 °C -0.5 -0.25 0 0.25 0.5 -50 -8 -100 -9 0 20 40 60 80 100 120 Supply Voltage, VCC (V) Load Voltage, VL (V) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 8.0 0.5 IF = 10 mA VL = 5 V RL = 500 Ω Turn-off Time, tOFF (ms) IF = 10 mA VL = 5 V RL = 500 Ω Turn-on Time, tON (ms) 50 6.0 4.0 2.0 0.4 0.3 0.2 0.1 0 10 20 30 0 40 20 30 Forward Current, IF (mA) Forward Current, IF (mA) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 30 30 n = 50 pcs IF = 10 mA VO = 5 V 25 20 15 10 5 n = 50 pcs IF = 10 mA VO = 5 V 25 Number (pcs) Number (pcs) 10 20 15 10 5 0 0 0.05 0.10 0.315 Turn-on Time, tON (ms) 0.02 0.06 Turn-off Time, tOFF (ms) 40 PS7111-2A, PS7111L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 °C IF = 10 mA VL = 5 V RL = 500 Ω 2.5 Normalized Turn-off Time, tOFF Normalized Turn-on Time, tON 3.0 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 2.5 2.0 1.5 1.0 0.5 0.0 -25 100 Normalized to 1.0 at TA = 25 °C IF = 10 mA VL = 5 V RL = 500 Ω 0 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) TAPING SPECIFICATIONS (Units in mm) 2.0 ± 0.1 1.55 ± 0.1 4.0 ± 0.1 OUTLINE AND DIMENSIONS (REEL) 1.75 ± 0.1 OUTLINE AND DIMENSIONS (TAPE) 4.3 ± 0.2 φ330 10.3 ± 0.1 R 1.0 1.55 ± 0.1 10.7 ± 0.1 φ80.0 ± 5.0 φ13.0 ± 0.5 16.0 ± 0.3 7.5 ± 0.1 2.0 ± 0.5 φ21.0 ± 0.8 0.3 12.0 ± 0.1 +2.0 16.4- 0.0 Packaging : 1000 pcs/reel TAPING DIRECTION PS7111L-2A-E3 PS7111L-2A-E4 PS7111-2A, PS7111L-2A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 07/27/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE