4 PIN SOP, 1.0 Ω LOW ON-STATE RESISTANCE 1-CH OPTICAL COUPLED MOSFET PS7214-1A FEATURES DESCRIPTION • LOW ON-STATE RESISTANCE: RON = 1.0 Ω TYP The PS7214-1A is a low on-state resistance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. • LARGE CONTINUOUS LOAD CURRENT: IL = 400 mA It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance. • 1 CHANNEL TYPE: 1a output • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL AND THIN PACKAGE: 4 pin SOP, Height = 2.1 mm APPLICATIONS • HIGH ISOLATION VOLTAGE: (BV = 1500 Vr.m.s.) • MEASUREMENT EQUIPMENT • FA EQUIPMENT • LOW OFFSET VOLTAGE • SURFACE MOUNT TYPE LEAD: PS7214-1A-E3, E4, F3, F4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER Coupled MOS Diode FET SYMBOLS PS7214-1A PARAMETERS UNITS MIN TYP MAX 1.2 1.4 VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA 5.0 ILOFF Off-State Leakage Current, VD = 100 V µA 1.0 COUT Output Capacitance, VD = 0 V, f = 1 MHz pF IFon LED On-State Current, IL = 400 mA mA 120 Ron On-state Resistance, IF = 10 mA, IL = 400 mA, t≤10 ms Ω 1.0 1.2 tON Turn-on Time1, IF = 10 mA, VO = 5 V, RL = 500 Ω, PW ≥ 10 ms ms 1.3 2.0 tOFF Turn-off Time1, IF = 10 mA, VO = 5 V, RL = 500 Ω, PW ≥ 10 ms ms 0.1 1.0 RI-O Isolation Resistance, VI-O = 1.0 kVDC Ω CI-O Isolation Capacitance, V = 0 V, f = 1 MHz pF 2.0 109 0.5 Note: 1. Test circuit for Switching Time: PS7214-1A IF Pulse Input VL Input 4 3 1 2 50% 0 Input Monitor VO Monitor Rin RL VO = 5 V 90% Output 10% ton toff California Eastern Laboratories PS7214-1A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF VR PD IFP MOSFET VL IL ILP PD Coupled BV PT TA TSTG PARAMETERS UNITS RATINGS Forward Current (DC) Reverse Voltage Power Dissipation Peak Foward Current2 mA V mW A 50 5.0 50 1 Break Down Voltage Continuous Load Current Pulse Load Current3 (AC/DC Connection) Power Dissipation V mA A 100 400 0.8 mW 300 Isolation Voltage4 Total Power Dissipation Operating Ambient Temp. Storage Temperature Vr.m.s. mW °C °C 1500 350 -40 to +85 -40 to +100 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) PART NUMBER Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. SYMBOLS PARAMETERS IF LED Operating Current VF LED Off Voltage PART NUMBER 3 1 2 7.0±0.3 +0.08 2.05 -0.05 4.4 +0.10 0.15 -0.05 2.0 +0.10 +0.08 0.05 -0.05 2.54 0.4 -0.05 0.25 M 0.5±0.3 MIN TYP MAX 2 10 20 0 0.5 PACKING STYLE PS7214-1A Magazine case 100 pcs PS7214-1A-E3 Embossed tape 900 pcs/reel PS7214-1A-E4 PS7214-1A-F3 PS7214-1A-F4 Top View 4 UNITS mA V ORDERING INFORMATION OUTLINE DIMENSIONS (Units in mm) 4.0±0.5 PS7214-1A 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET Embossed tape 3500 pcs/reel PS7214-1A TYPICAL PERFORMANCE CURVES (TA = 25°C) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 600 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 85 400 200 0 -25 100 0 25 50 75 85 100 Ambient Temperature,TA (°C) Ambient Temperature,TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 1.8 200 1.6 1.4 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1.2 1.0 0.8 -25 1 mA 25 0 50 75 Output Capacitance, Cout (pF) Forward Voltage, VF (V) f = 1 MHz 150 100 50 0 0 100 10 Ambient Temperature,TA (°C) 50 40 60 LOAD CURRENT vs. LOAD VOLTAGE 10 -6 IF = 10 mA IL = 400 mA VD = 100 V 600 400 Load Current, IL (mA) 10 -7 10 -8 10 -9 10-10 10 -11 0 30 Applied Voltage, VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE Off-state Leakage Current, ILoff (mA) 20 200 -0.8 -0.4 0 0.4 -200 -400 -600 20 40 60 Ambient Temperature,TA (°C) 80 Load Voltage, VL (V) 0.8 PS7214-1A TYPICAL PERFORMANCE CURVES (TA = 25°C) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 Normalized to 1.0 at TA = 25°C, IF = 10 mA, IL = 400 mA 2.5 20 2.0 1.5 1.0 15 10 5 0.5 0 0 -25 0 25 50 75 TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT VO = 5 V, RL = 500 Ω 5.0 0.25 Turn-off Time, toff (ms) Turn-on Time, Ton (ms) 1.2 0.30 VO = 5 V, RL = 500 Ω 4.0 3.0 2.0 0.20 0.15 0.10 0.05 1.0 5 10 15 20 25 0 0 30 Forward Current, IF (mA) 5 10 15 20 25 Forward Current, IF (mA) TURN-OFF TIME DISTRIBUTION TURN-ON TIME DISTRIBUTION 30 30 n = 50 pcs, IF = 10 mA, VO = 5 V RL = 500 Ω 20 15 20 15 10 10 5 5 1.3 1.5 Turn-on Time, ton (ms) n = 50 pcs, IF = 10 mA, VO = 5 V RL = 500 Ω 25 Number (pcs) 25 Number (pcs) 1.0 On-state Resistance,Ron (Ω) 6.0 0 0.8 100 Ambient Temperature,TA (°C) 0 0 n = 50 pcs, IF = 10 mA, IL = 400 mA, f ≤ 10 ms 25 Number (pcs) Normalized On-state Resistancet, Ron 3.0 0 0.08 0.12 Turn-off Time, toff (ms) 30 PS7214-1A TYPICAL PERFORMANCE CURVES (TA = 25°C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25°C IF = 10 mA, VO = 5 V, RL = 500 Ω 2.5 Normalized Turn-off Time, Ron Normalized Turn-on Time, Ron 3.0 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 2.5 2.0 1.5 1.0 0.5 0.0 100 Normalized to 1.0 at TA = 25°C IF = 10 mA, VO = 5 V, RL = 500 Ω -25 0 25 Remark: The graphs indicate nominal characteristics. TAPING SPECIFICATIONS Tape Outline and Dimensions 2.0 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 2.4 ± 0.1 1.55 ± 0.1 5.5 ± 0.1 7.4 ± 0.1 12.0 ± 0.2 0.3 1.55 ± 0.1 4.6 ± 0.1 8.0 ± 0.1 Tape Direction PS7214-1A-E3 PS7214-1A-E4 2.0 Reel Outline and Dimensions 2.0 ± 0.5 φ60 φ13.0±0.5 15° 15° φ180 φ13 ± 0.5 φ21.0 ± 0.8 Packing: 900 pcs/reel 50 75 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) 13.0±1.0 100 PS7214-1A TAPING SPECIFICATIONS Tape Outline and Dimensions 2.0 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 2.4 ± 0.1 1.55 ± 0.1 5.5 ± 0.1 7.4 ± 0.1 12.0 ± 0.2 0.3 1.55 ± 0.1 4.6 ± 0.1 8.0 ± 0.1 Tape Direction PS7214-1A-F3 PS7214-1A-F4 Reel Outline and Dimensions 1.5 ± 0.1 12 0∞ 1.5 ± 0.5 60 ∞ φ80±5.0 φ 330 2.0 ± 0.5 φ13.0±0.5 φ21.0 ± 0.8 6.0 ± 1 +2.0 12.4 -0.0 Packing: 3500 pcs/reel RECOMMENDED SOLDERING CONDITIONS Package Surface Temperature T (˚C) (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 ºC • Number of reflows • Flux 235 ûC or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature 260° or below (package surface temperature) • Time 10 seconds or less • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 06/27/2002