8 PIN SOP 400 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET PS7241-1C FEATURES DESCRIPTION • 2 CHANNEL TYPE: 1a + 1b Output PS7241-1C is a transfer type solid state relay containing normally open (N.O.) contact and normally closed (N.C.) contact on the output side. • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL AND THIN PACKAGE: 8 PIN SOP This device is suitable for analog signal control because of its low offset and high linearity. • LOW LED OPERATING CURRENT: IF = 2 mA APPLICATIONS • LOW OFFSET VOLTAGE • • • • • AVAILABLE IN TAPE AND REEL EXCHANGE EQUIPMENT MEASUREMENT EQUIPMENT FA/OA EQUIPMENT COMMUNICATIONS EQUIPMENT • DAA (MODEM) ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER Coupled MOSFET Diode SYMBOLS PS7241-1C PARAMETERS UNITS MIN TYP MAX 1.2 1.4 VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA Off-State Leakage Current, N.O.: IF = 0 mA, VD = 400 V N.C.: IF = 10 mA, VD = 400 V µA 0.03 pF/ch 65 185 ILoff COUT Output Capacitance N.O.: VD = 0 mA, f = 1.0 mHz N.C.: VD = 0 mA, f = 1.0 mHz, IF = 10 mA IFon LED On-state Current NO: IL = 120 mA IFoff LED Off-state Current NC IL = 120 mA Ron1 On-State Resistance, N.O.: IF = 10 mA, IL = 10 mA N.C.: IF = 0 mA, IL = 10 mA Ron2 Turn-On Time1 tOFF (N.O.) tOFF (N.C.) Turn-Off Time1 1 mA N.O.: IF = 10 mA, IL = 120 mA, t ≤10 ms N.C.: IF = 0 mA, IL = 120 mA, t ≤10 ms tON (N.O.) tON (N.C.) 5 IF = 10 mA, VO = 5 V, PW ≥ 10 ms 2.0 Ω 21 30 Ω 16 25 ms 0.2 0.02 1.0 0.2 0.02 0.1 0.2 1.0 Rl-O Isolation Resistance, VIN-OUT = 1.0 kVDC Ω Cl-O Isolation Capacitance, V = 0 V, f = 1 MHz pF/ch 109 0.4 Note: 1. Test Circuit for Switching Time: N.O. (Between Pin 5 and 6) Input N.C. (Between Pin 7 and 8) Pulse Input 0 VO = 5 V Output 90% tOFF VL 8 7 6 5 1 2 3 4 0 VO = 5 V Output 90% 10% tON PS7241-1C IF Input 10% tOFF Input Monitor VO Monitor Rin RL tON California Eastern Laboratories PS7241-1C ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS Diode VR Reverse Voltage IF Forward Current (DC) PD Power Dissipation UNITS RATINGS V mA mW/ch 5 50 50 A 1 V mA mA 400 120 200 mW/ch 180 Vr.m.s. mW °C °C 1500 460 -40 to +100 -40 to +80 SYMBOL IF LED Operating Current VF LED Off Voltage ORDERING INFORMATION PART NUMBER PACKAGE PACKING STYLE PS7241-1C 8 pin SOP Magazine case 45 pcs UNITS MIN TYP MAX mA 2 V 0 10 9.08±0.5 (TOP VIEW) 8 7 6 5 1 2 3 4 7.0±0.3 4.4 0.15 -0.08 2.05+0.05 +0.10 -0.05 2.54 0.40 0.5 ± 0.3 -0.10 +0.05 Embossed tape 1500 pcs/reel 1. LED Anode 5. MOSFET (N.O.) 2. LED Cathode 6. MOSFET (N.O.) 3. LED Anode 7. MOSFET (N.C.) 4. LED Cathode 8. MOSFET (N.C.) PS7241-1C-F4 TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 80 Ambient Temperature, TA (°C) 100 20 0.5 OUTLINE DIMENSIONS (Units in mm) -0.08 0.5 +0.05 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. 4. PW = 100 ms, 1 shot. PARAMETER 0.4±0.3 IF (Peak) Peak Forward Current2 MOSFET VL Break Down Voltage IL Continuous Load Current ILP Pulse Load Current4 (AC/DC Current) PD Power Dissipation Coupled BV Isolation Voltage3 PT Total Power Dissipation TSTG Storage Temperature TA Ambient Temperature PS7241-1C-F3 RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) 200 100 0 -25 0 25 50 75 80 Ambient Temperature, TA (°C) 100 PS7241-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 200 1.8 1.6 1.4 IF = 50 mA 30 mA 20 mA 10 mA 1.2 5 mA 1.0 1 mA 0.8 -25 0 25 50 75 Output Capacitance, Cout (pF) Forward Voltage, VF (V) f = 1 MHz 150 100 N.C. N.O. 50 0 100 20 40 80 OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 120 LOAD CURRENT vs. LOAD VOLTAGE 10-5 200 10 -6 10 -7 Load Current, IL (mA) TA = 80°C 25°C 10 -8 10 -9 100 -4.0 -2.0 0 100 200 300 400 2.0 N.O.: IF = 10 mA, N.C.: IF = 0 mA -200 500 Applied Voltage, VD (V) Load Voltage, VL (V) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 1.2 1.2 VO = 5 V VO = 5 V Turn-Off Time, tOFF (ms) 1.0 0.8 0.6 0.4 N.O. 0.2 1.0 0.8 0.6 0.4 N.C. 0.2 N.O. N.C. 0 4.0 -100 N.O.: IF = 0 mA, N.C.: IF = 10 mA 0 Turn-On Time, tON (ms) 100 Applied Voltage, VD (V) Ambient Temperature, TA (°C) Off-State Leakage Current, ILoff (A) 60 5 10 15 20 Forward Current, IF (mA) 25 30 0.0 5 10 15 20 Forward Current, IF (mA) 25 30 PS7241-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 2.0 N.O. 1.5 N.C. 1.0 0.5 Normalized Turn-Off Time, tOFF 2.5 0.0 Normalized On-State Resistance, RON Normalized to 1.0 at TA = 25°C, IF = 10 mA, VO = 5 V 0 50 25 75 100 Normalized to 1.0 at TA = 25°C, IF = 10 mA, VO = 5V 2.5 2.0 N.C. 1.5 N.O. 1.0 0.5 0.0 -25 -25 75 100 NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE (N.O.) DISTRIBUTION 3.0 Normalized to 1.0 at TA = 25°C, IF = 10 mA, IL = 10 mA (N.O.), IF = 0 mA, IL = 10 mA (N.C.) 2.5 2.0 N.O. 1.5 N.C. 20 15 1.0 10 0.5 5 -25 n = 50 pcs, IF = 10 mA, IL = 10 mA 25 0 0 25 50 75 19 100 Ambient Temperature, TA (°C) 20 21 22 23 On-State Resistance, Ron (Ω) ON-STATE RESISTANCE (N.C.) DISTRIBUTION TURN-ON TIME (N.O) DISTRIBUTION 3.0 3.0 n = 50 pcs, IF = 0 mA, IL = 10 mA 20 15 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) 25 Number (pcs) 50 25 Ambient Temperature, TA (°C) 3.0 0.0 0 Ambient Temperature, TA (°C) Number (pcs) Normalized Turn-On Time, tON 3.0 20 15 10 10 5 5 0 0 19 20 21 22 23 On-State Resistance, Ron (Ω) 0.2 0.3 Turn-On Time, tON (ms) PS7241-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) TURN-ON TIME (N.C) DISTRIBUTION TURN-OFF TIME (N.O) DISTRIBUTION 3.0 3.0 n = 50 pcs, IF = 10 mA, VO = 5 V 20 15 10 5 20 15 10 5 0 0 0.02 0.04 0.02 Turn-On Time, tON (ms) TURN-OFF TIME (N.C) DISTRIBUTION 3.0 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) 25 Number (pcs) Number (pcs) 25 n = 50 pcs, IF = 10 mA, VO = 5 V 20 15 10 5 0 0.1 0.2 Turn-Off Time, tOFF (ms) 0.04 Turn-Off Time, tOFF (ms) PS7241-1C TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) OUTLINE AND DIMENSIONS (REEL) 2.0 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 2.8 ± 0.1 1.55 ± 0.1 φ21.0 ± 0.8 φ13.0±1.0 φ330 2.0 ± 0.5 10.45 ± 0.1 φ100±5.0 7.5 ± 0.1 16.0 ± 0.3 0.3 1.55 ± 0.1 7.6 ± 0.1 12.0 ± 0.1 +2.0 16.4 -0.0 Packing : 1500 pcs/reel TAPING DIRECTION PS7241-1C-F3 PS7241-1C-F4 PS7241-1C RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. • Avoid shorting between portion of frame and leads. * * *: Portion of frame EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 07/16/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE