Complement to LB Pushbuttons LB Indicators TYPICAL INDICATOR ORDERING EXAMPLE LB 01 5C 12 W01 G SHAPES JC LAMPS CAP TYPES & COLORS Solid Cap: Lens/Filter Colors 01 Square 02 Round Incandescent Lamp used with Solid Cap 03 Rectangular 05 5-volt BJ White/Clear 12 12-volt CJ Red/Clear EJ Yellow/Clear FJ Green/Clear GJ Blue/Clear HOUSING K Black G Gray Incandescent or Neon used w/ Insert Cap TERMINALS W01 Insert Cap: Lens/Filter Colors 01 110-volt Neon JB Clear/White 05 5-volt Incandescent JC Clear/Red 12 12-volt Incandescent JE Clear/Yellow * JF Clear/Green * JG Clear/Blue Silver Solder Lug/ Quick Connect Terminals * JF & JG not suitable with neon. Bright LED used with LED Cap Colors 5C Red 5D Amber 5F Green LED Cap: Lens/Diffuser Colors Resistor JB Clear/White No Resistor JC Clear/Red 05 5-volt JD Clear/Amber 12 12-volt JF Clear/Green 24 24-volt No Code Super Bright LED used with LED Cap 6B White 6F Green 6G Blue LED Cap: Lens/Diffuser Colors JB Clear/White DESCRIPTION FOR TYPICAL ORDERING EXAMPLE LB01GW01-5C12-JC Clear Cap with Red Diffuser Red, 12-volt, Bright LED with Resistor Square Shape and Gray Housing Silver Solder Lug/ Quick Connect Terminals NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 LB Indicators Complement to LB Pushbuttons SHAPES & PANEL CUTOUTS .622” (15.8mm) Square 01 02 .854” (21.7mm) Round .622” x .866” (15.8mm x 22.0mm) Rectangular 03 (22.0) Dia .866 (16.2) .638 (11.5) .453 (16.2) Sq .638 (22.4) .882 (1.5) R .059 Panel Thickness: .039” ~ .157” (1.0 ~ 4.0mm) HOUSING K Housing Colors Available: G Black Gray TERMINALS W01 Silver Solder Lug/.110” (2.8mm) Quick Connect Epoxy Seal (7.5) .295 (2.0) .079 (2.8) .110 (1.2) .047 Thk = (0.5) .020 LAMP CODES & SPECIFICATIONS Incandescent Lamp for Solid Colored and Colored Insert Caps AT607 12 Voltage V 5V AC 12V AC Current I 115mA 60mA Endurance T-1 Bi-pin 05 Hours 7,000 average Ambient Temp. Range –25°C ~ +50°C Neon Lamp for Colored Insert Cap 01 AT607N Voltage V 110V AC Current I 1.5mA Endurance T-1 Bi-pin Ambient Temp. Range Hours 10,000 average –25°C ~ +50°C Recommended Resistors: 33K ohms for 110V AC; 100K ohms for 220V AC The electrical specifications shown are determined at a basic temperature of 25°C. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 LB Indicators Complement to LB Pushbuttons LED COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. Polarity marks are on the device. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Additional lamp detail is shown in the Accessories & Hardware section. Bright LED without Resistor Red Amber Green 5C 5D 5F Red Amber Green Forward Peak Current IFM 30mA 30mA 30mA Continuous Forward Current IF 20mA 20mA 20mA Forward Voltage VF 1.9V 2.0V 2.1V Reverse Peak Voltage VRM 5V 5V 5V Current Reduction Rate Above 25°C ∆IF 0.42mA/°C 0.42mA/°C 0.42mA/°C AT635 Color Codes LEDs are colored in OFF state. (+) (-) No Code Ambient Temperature Range T-1 ⁄ Bi-pin 12 No Resistor –25° ~ +50°C Bright LED with Resistor AT627 with Resistor Color Codes: Amber Green 5C 5D 5F Resistor Codes 05 12 24 Forward Peak Current IFM — — — Continuous Forward Current IF 52mA 26mA 13mA Forward Voltage VF 5V 12V 24V Reverse Peak Voltage VRM 4V 8V 16V Current Reduction Rate Above 25°C ∆IF 0.50mA/°C Ambient Temperature Range T-1 Bi-pin AT627 5-volt 4-element with Resistor Red (+) (-) –25° ~ +50°C AT627 12-volt 4-element (+) with Resistor (-) AT627 24-volt (+) 4-element with Resistor (-) Super Bright Single Element LED Attention AT625G Blue AT631B White AT632F Green (+) (-) T-1 Bi-pin 6B 6F 6G Color White Green Blue Forward Peak Current IFM 30mA 30mA 30mA Continuous Forward Current IF 20mA 20mA 20mA Forward Voltage VF 3.6V 3.5V 3.6V Reverse Peak Voltage VRM 5V 5V 5V Current Reduction Rate Above 25°C ∆IF Electrostatic Sensitive Devices Ambient Temperature Range 0.50mA/°C –25° ~ +50°C NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 LB Indicators Complement to LB Pushbuttons CAP TYPES & COLOR COMBINATIONS Color Codes: B White C Red D Amber E Yellow F Green G Blue J Clear Solid Cap for Incandescent Lamp Lens/Filter Colors Available: BJ FJ CJ GJ AT476 Square AT4012 Round (3.5) .138 (13.2) Sq .520 (19.0) Dia .748 AT4026 Rectangular (4.5) .177 (5.5) .217 (13.2) .520 Translucent Colored Lens (19.4) .764 (5.0) .197 (6.0) .236 (6.5) .256 Transparent Clear Filter EJ Material: Polycarbonate Lamp AT607 Finish: Glossy Insert Cap for Incandescent or Neon Lamp Lens/Filter Colors Available: JB JF JC JG AT477 Square AT4013 Round (3.5) .138 (13.2) Sq .520 (19.0) Dia .748 AT4027 Rectangular (4.5) .177 (5.5) .217 (13.2) .520 Transparent Clear Lens (19.4) .764 (5.0) .197 (6.0) .236 (6.5) .256 Translucent Colored Filter JE JF and JG not suitable with neon lamp. Material: Polycarbonate Finish: Glossy Lamp AT607 or 607N Cap for Bright LED without Resistor Lens/Diffuser Colors Available: JB (13.2) Sq .520 JC AT4176 Square AT4178 Round (19.0) Dia .748 (3.5) .138 AT4177 Rectangular (4.5) .177 ������ ���� Transparent Clear Lens ������ ���� (6.5) .256 ����� ���� (5.5) .217 JD JF Material: Polycarbonate ����� ���� Translucent Colored Diffuser Bright LED AT635 Finish: Glossy Cap for Bright LED with Resistor Lens/Diffuser Colors Available: JB JC JD JF (13.2) Sq .520 AT4162 Square AT4164 Round (3.5) .138 (6.5) .256 (19.0) Dia .748 AT4163 Rectangular (4.5) .177 (13.2) .520 (5.0) .197 (6.0) .236 (5.5) .217 Material: Polycarbonate Transparent Clear Lens (19.4) .764 Finish: Glossy Translucent Colored Diffuser Bright LED AT627 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 LB Indicators Complement to LB Pushbuttons CAP TYPES & COLOR COMBINATIONS Cap for Super Bright LEDs JB Clear Lens White Diffuser Material: Polycarbonate Finish: Glossy AT4129 Square AT4128 Round (3.5) .138 (13.2) Sq .520 (19.0) Dia .748 AT4130 Rectangular (4.5) .177 (5.5) .217 (13.2) .520 Transparent Clear Lens (19.4) .764 Translucent White Diffuser (5.0) .197 (6.0) .236 (6.5) .256 LEDs AT625 AT631 AT632 TYPICAL INDICATOR DIMENSIONS Square (1.2) x (2.0) Typ .047 x .079 (0.5) Typ .020 L (+) (15.8) Sq .622 (13.2) Sq .520 (2.54) Typ .100 (17.8) Sq .701 (3.2) .126 (1.8) .071 (21.5) .846 L (-) (2.8) .110 (7.5) .295 LB01KW01-12-CJ Round (1.2) x (2.0) Typ .047 x .079 (0.5) Typ .020 L (+) (15.8) Sq .622 (2.54) Typ .100 L (-) (19.0) Dia .748 (23.7) Dia .933 (3.2) .126 (1.8) .071 (21.5) .846 (7.5) .295 (21.7) Dia .854 (2.8) .110 LB02KW01-12-CJ Rectangular (1.2) x (2.0) Typ .047 x .079 (0.5) Typ .020 (17.8) .701 L (+) (13.2) .520 (15.8) .622 (2.54) Typ .100 L (-) (19.4) .764 (24.0) .945 (3.2) .126 (1.8) .071 (22.5) .886 (7.5) .295 (22.0) .866 (2.8) .110 LB03KW01-12-CJ NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07