Oscilent Corporation IF SAW Filter | 816-IF36.125M-BB Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 816-IF36.125M-BB 16.3 x 6.3 Thru Hole Digital CableTV Jan. 01, 2007 . TYPE : 36.125 MHz IF SAW Filter for Digital Cable TV PART NUMBER : 816-IF36.125M-BB .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency (Fo) - 36.125 - MHz Insertion Loss Fo - 17.0 19.0 dB Operating Temperature Range -25 - +65 C Storage Tempature Range -40 - +85 C Temperature Coefficient - -72 - ppm/C Bandwidth at 3.0 dB - 8.0 - MHz Bandwidth at 30.0 dB - 9.4 - MHz - Attenuation: (Ref.: 36.125MHz) 31.25 MHz 35 38 - dB 32.13 MHz 3.0 4.5 6.0 dB 32.32 MHz 0.5 2.0 3.5 dB - 0 - dB 39.93 MHz 0.1 1.5 3.0 dB 40.13 MHz 1.0 2.5 4.0 dB 47.25 MHz 42 45 - dB From 25.00 to 29.50 MHz 35 40 - dB From 29.50 to 31.25 MHz 33 36 - dB From 40.90 to 43.50 MHz 30 33 - dB From 43.50 to 50.00 MHz 36.125 MHz (Reference frequency) - Relative Attenuation . 35 40 - dB Group Delay Variation (32.13~40.13 MHz) - 50 - ns Maximum DC Voltage - 10V DC - VDC PACKAGE OUTLINE (mm) Oscilent Corporation IF SAW Filter | 816-IF36.125M-BB Page 2 of 2 PIN Description: 1= IN 2= IN/ GROUND 3= GROUND 4,5= OUTPUT FREQUENCY RESPONSE Part No.: 816-IF36.125M-BB Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map