Oscilent Corporation IF SAW Filter | 813-SL140.0M-08 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL140.0M-08 13.3 x 6.5 SMD Base Station & Repeater Apr 18, 2007 . TYPE : 140.0 MHz Bandpass Filter Low Loss Narrow Bandwidth PART NUMBER : 813-SL140.0M-08 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units MHz 139.6 140.0 140.4 Insertion Loss at Fo - 8 10 dB Source Impedance (single ended)* - 50 - ohm Load Impedance (single ended)* - 50 - ohm Bandwidth at -1.0 dB 7.6 7.9 - MHz Bandwidth at -3.0 dB 8.5 8.8 - MHz Bandwidth at -40.0 dB - 13.0 13.8 MHz Relative Attenuation: - - - - from 10 to 133 MHz 45 - - dB from 147 to 280 MHz 45 - - dB Amplitude Ripple within fo +/- 3.2MHz - 0.6 1.0 dBp-p Group Delay Variation (Fo +/- 3.2MHz) - 60 100 nsec Absolute Delay at Fo - 1.0 - µsec In/Out Return Loss at Fo - - - dB Center Frequency *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 813-SL140.0M-08 Page 2 of 2 PIN Description IN-11, OUT-5, GROUND-1,2,3,4,6,7,8,9,10,12 w FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 813-SL140.0M-08