Miniature 10Base-T Interface Module with Enhanced CMA ELECTRONICS INC. ECT10 & ECT10-RC • Enhanced Common Mode Attenuation • Complies with or exceed IEEE802.3, 10Base-T Requirements • Robust design allows to withstand SMD soldering profiles • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25° C Cut-off Frequency (MHz) Insertion Loss (1) (dB Max.) ± 1.0 MHz 1-10 MHz Attenuation (dB Min.) @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv 17 17 -1.5 -1.5 -7 -6 -19 -14 -32 -20 -35 -31 • (1) Referenced to the Output Level Fundamental Frequency @ 5 MHz • Package Schematic .500 (12.70) Transmit Channel .075 (1.90) .050 (1.27) .075 (1.90) 100 Ω Pin 1 I.D. PCA ECT10(-RC) Date Code .250 (6.35) .460 (11.68) 16 1 LPF 14 3 Solder Pad Layout 15 100 Ω 2 1:1 Receive Channel .350 (8.89) .030 (.762) 100 Ω .325 (8.25) .010/.015 (.254/.381) .016/.022 (.406/.559) .008/.012 (.203/.305) 0°-8° .050 (1.27) 11 6 LPF 10 100 Ω 7 9 8 1:1 .060/.065 (1.52/1.65) .420 (10.67) Notes : ECT10 ECT10-RC SnPb Hot Tin Dip (Sn) † 1. Lead Finish 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) 0.84 grams 0.84 grams 39 pieces/tube 600 pieces/13” reel 39 pieces/tube 600 pieces/13” reel (*ECT10TR) (*ECT10TR-RC) † Hot tin dipped over Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSECT10 & -RC Rev. C2 6/26/06 JGD TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com