Low Pass Filter for Cable Modem Applications ELECTRONICS INC. EPB5064GM & EPB5064GM-RC • Integrated LPF designed to work with Broadcom’s BCM3033, BCM3137 and BCM3210 Chips • Robust construction to meet IR/VP soldering processes • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) Attenuation (dB Min.) Group Delay (nS Max.) ± 3.0 MHz 1 MHz-40 MHz 1 MHz-40 MHz @ 75 MHz 100 MHz-200 MHz 40 MHz 50 -1.5 -15 -15 -30 35 • Characteristic Filter Impedance : 150 Ω • Package Schematic .750 (19.05) 14 .070/.080 (1.78/2.03) Pin 1 I.D. .085 (2.16) .100 (2.54) PCA EPB5064GM(-RC) Date Code .270 (6.86) .450 (11.433) .600 (15.24) 8 LPF 1 Pad Layout 7 2, 3, 12 & 13 - Ground 1 5, 6, 9 & 10 - Ground 2 4 & 11 Not Connected .030 (.762) .010/.020 (.254/.508) .008/.012 (.203/.305) 0°-8° .200 (5.08) .040 (1.02) .016/.022 (.406/.559) .400 (10.16) .100 (2.54) Notes : 1. Lead Finish EPB5064GM EPB5064GM-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 245°C MSL = 4 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) TBD grams TBD grams TBD pieces/tube TBD pieces/13” reel TBD pieces/tube TBD pieces/13” reel (*EPB5064GMTR) (*EPB5064GMTR-RC) 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) † Hot tin dipped over Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSB5064GM & -RC Rev. 1 9/13/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com