PI6C48535-11 3.3V Low Skew 1-to-4 Crystal/LVCMOS to LVPECL Fanout Buffer Features Description • • • • • • • • • • • The PI6C48535-11 is a high-performance low-skew LVPECL fanout buffer. PI6C48535-11 features selectable of single-ended clock or crystal inputs and translates to four LVPECL outputs. The CLK input accepts LVCMOS or LVTTL signals. The outputs are synchronized with input clock during asynchronous assertion /deassertion of CLK_EN pin. PI6C48535-11 is ideal for crystal or LVCMOS/LVTTL to LVPECL translation. Typical clock translation and distribution applications are data-communications and telecommunications. Maximum operation frequency: 500MHz 4 pair of differential LVPECL outputs Selectable CLK and crystal inputs CLK accepts LVCMOS, LVTTL input level Output Skew: 30ps (maximum) Part-to-part skew: 150ps (maximum) Propagation delay: 1.5ns (maximum) 3.3V power supply Pin-to-pin compatible to ICS8535-11 Operating Temperature: -40oC to 85oC Packaging (Pb-free & Green available): - 20-pin TSSOP (L) Block Diagram Pin Diagram CLK_EN D Q LE CLK Xtal1 Xtal2 CLK_SEL 0 1 Q0 nQ0 Q1 nQ1 Q2 nQ2 VEE 1 20 Q0 CLK_EN 2 19 NQ0 CLK_SEL 3 18 VCC CLK 4 17 Q1 NC 5 16 NQ1 Xtal1 6 15 Q2 Xtal2 7 14 NQ2 NC 8 13 VCC NC 9 12 Q3 VCC 10 11 NQ3 Q3 nQ3 1 PS9738 05/27/04 PI6C48535-11 3.3V Low Skew 1-to-4 Crystal/LVCMOS to LVPECL Fanout Buffer Pin Description Name Pin # Type Description VEE 1 P CLK_EN 2 I_PU Synchronizing clock enable. When high, clock outputs follow clock input. When low, Qx outputs are forced low, nQx outputs are forced high. LVCMOS/LVTTL level with 50KΩ pull up. CLK_SEL 3 I_PD Clock select input. When high, selects CLK1 input. When low, selects CLK0 input. LVCMOS/LVTTL level with 50KΩ pull down. CLK 4 I_PD LVCMOS / LVTTL clock input Xtal1, Xtal2 6, 7 Crystal input and output NC 5, 8, 9 No internal connection. VCC 10, 13, 18 P Connect to 3.3V Q3, nQ3 11, 12 O Differential output pair, LVPECL interface level. Q2, nQ2 14, 15 O Differential output pair, LVPECL interface level. Q1, nQ1 16, 17 O Differential output pair, LVPECL interface level. Q0, nQ0 19, 20 O Differential output pair, LVPECL interface level. Connect to Negative power supply Notes: 1. I = Input, O = Output, P = Power supply connection, I_PD = Input with pull down, I_PU = Input with pull up Pin Characteristics Symbol Parameter Conditions Min. Typ. Max. Units CIN Input Capacitance 4 pF R_pullup Input Pullup Resistance 50 KΩ R_pulldown Input Pulldown Resistance 50 KΩ Control Input Function Table Inputs Outputs CLK_EN CLK_SEL Selected Source Q0:Q3 nQ0:nQ3 0 0 CLK Diasbled: Low Diasbled: High 0 1 Xtal1, Xtal2 Disabled: Low Disabled: High 1 0 CLK Enabled Enabled 1 1 Xtal1, Xtal2 Enabled Enabled Notes: 1. After CLK_EN switches, the clock outputs are disabled or enabled following a rising and falling input clock edge as show below. 2 PS9738 05/27/04 PI6C48535-11 3.3V Low Skew 1-to-4 Crystal/LVCMOS to LVPECL Fanout Buffer Figure 1. CLK_EN Timing Diagram Disabled Enabled CLK CLK_EN nQ0:nQ3 Q0:Q3 Clock Input Function Table Inputs Outputs CLK Q0:Q3 nQ0:nQ3 0 LOW HIGH 1 HIGH LOW Absolute Maximum Ratings Symbol Parameter Conditions Min. Typ. Max. VCC Supply voltage Referenced to GND VIN Input voltage Referenced to GND -0.5 VCC +0.5V VOUT Output voltage Referenced to GND -0.5 VCC +0.5V TSTG Storage temperature -65 150 Units 4.6 V oC Notes: 1. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stress specifications only and correct functional operation of the device at these or any other conditions above those listed in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability. Operating Conditions Symbol Parameter VCC Power Supply Voltage TA Ambient Temperature IEE Power Supply Current Conditions Min. Typ. Max. 3.0 3.3 3.6 V 85 oC 60 mA -40 3 PS9738 Units 05/27/04 PI6C48535-11 3.3V Low Skew 1-to-4 Crystal/LVCMOS to LVPECL Fanout Buffer LVCMOS/LVTTL DC Characteristics (TA = -40oC to 85oC, VCC = 3.0V to 3.6V unless otherwise stated below.) Symbol Parameter Conditions Min Typ Max Units VIH Input High Voltage 2 VCC+0.3 VIL Input Low Voltage -0.3 0.8 IIH Input High Current CLK, CLK_SEL VIN = VCC = 3.6V 150 CLK_EN VIN = VCC = 3.6V 5 IIL Input Low Current CLK, CLK_SEL VIN = 0V, VCC = 3.6V -5 CLK_EN VIN = 0V, VCC = 3.6V -150 V µA LVPECL DC Characteristics (TA = -40oC to 85oC, VCC = 3.0V to 3.6V unless otherwise stated below.) Symbol Parameter VOH Output High Voltage(1) VOL Output Low Voltage(1) VSWING Conditions Min. Typ. Max. Units VCC-1.4 VCC-0.9 VCC-2.0 VCC-1.7 0.6 1.0 Peak-to-peak Output Voltage Swing V Notes: 1. Outputs terminated with 50Ω to VCC-2.0V Crystal Characteristics Parameter Min. Max. Units 25 MHz Equivalent Series Resistance (ESR) 70 Ω Shunt Capacitance 7 pF Mode of Oscillation Typ. Fundamental Frequency Range 14 AC Characteristics (TA = -40oC to 85oC, VCC = 3.0V to 3.6V) Symbol Parameter fmax Output Frequency tPd Propagation Tsk(o) Output-to-output Conditions Delay(1) Min. 1.0 Skew(2) Part-to-part tr/tf Output Rise/Fall time odc Output duty cycle Osc Crystal Tolerance Max. Units 500 MHz 1.5 ns 30 Skew(3) Tsk(pp) Typ. 150 20% - 80% ps 100 400 48 52 % 1000 ppm Notes: 1. Measured from the VCC/2 of the input to the differential output crossing point 2. Defined as skew between outputs at the same supply voltage and with equal load condition. Measured at the outputs differential crossing point. 3. Defined as skew between outputs on different parts operating at the same supply voltage and with equal load condition. Measured at the outputs differential crossing point. 4. All parameters are measured at 500MHz unless noted otherwise 4 PS9738 05/27/04 PI6C48535-11 3.3V Low Skew 1-to-4 Crystal/LVCMOS to LVPECL Fanout Buffer Packaging Mechanical: 20-Pin TSSOP (L) 20 .169 .177 1 .252 .260 6.4 6.6 .004 0.09 .008 0.20 .047 1.20 Max .007 .012 0.19 0.30 .0256 BSC 0.65 4.3 4.5 0.45 0.75 SEATING PLANE .018 .030 .238 .269 6.1 6.7 .002 0.05 .006 0.15 X.XX X.XX DENOTES CONTROLLING DIMENSIONS IN MILLIMETERS Ordering Information Ordering Code Package Code Package Description PI6C48535-11LE L Pb-free & Green 20-pin 173-mil wide TSSOP Notes: 1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ 2. Number of Transistors = TBD Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com 5 PS9738 05/27/04