WWW.PHIHONG.COM 5 WATT – COMPACT FOLDING BLADE ADAPTER PSA05F Adapter Meets EISA and ENERGY STAR Requirements Preliminary Standby Power Features • • • Folding Blades CC & CV control EPS 2.0 (Efficiency Level V) * • • 15mm thick with blades folded 5 Star Standby power <0.03W • • Personal Electronics Digital Camera • CE • • Height: 15.0mm (0.59in) Weight: 80g (3oz) Applications • • MPEG Players PDA Safety Approvals (Pending) • • cUL/UL IEEE1725 Approved Mechanical Characteristics • • Length: 60mm (2.36in) Width: 47mm (1.85in) Output Specifications Model DC Output Voltage PSA05F-050Q 5V Note: Load Min. Max. 0A 1.0A Ripple (1) P-P (max) Regulation Line Load 100mV ±5% Efficiency Level (1) Measured after 10 minutes with by-pass capacitors 0.1uf // 10uf at output connector terminal. Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the factory and visit www.phihong.com for the most up-to-date specifications. PSA05F Characteristics INPUT: WWW.PHIHONG.COM ENVIRONMENTAL: AC Input Voltage Rating 100 to 240VAC Operation Non-operation AC Input Voltage Range Humidity 90 to 264VAC Operation AC Input Current Immunity 0.25A(RMS) max. @ 120VAC 0.125A(RMS) max. @ 240VAC Leakage Current 0.25mA max. @ 230VAC ESD: RS: EFT: Surge: CS: Voltage Dips Harmonic: 0 to +40°C -25 to +85°C 10 to 90% EN61000-4-2. Level 3 EN61000-4-3. Level 2 EN61000-4-4. Level 2 EN61000-4-5. Level 3 EN61000-4-6. Level 2 EN61000-4-11 EN61000-3-2 Inrush Current (cold) <30A for 120VAC at max. load <60A for 240VAC at max. load (Cold start @ ambient 25°C) Emissions Input Power Saving Dielectric Withstand (Hi-pot) Test 0.03W max. @ 230VAC at no load FCC Class B EN55022 Class B Primary to Secondary: 3000VAC OUTPUT: DC Output Connector Efficiency USB A D+ and D- pins shorted together inside the charger ≥ 72.3% average efficiency Hold-up Time 10mS min. @ 120VAC and max. load Over-voltage Protection >120%, Zener Clamp Dimension Diagram Unit: mm ENVIRONMENTAL: Temperature Operation 0 to +40°C