WWW.PHIHONG.COM 15 Watt Universal 2-Wire Input Desktop Adapter PSAA15W Single Output Series Meets CEC and EISA Requirements Features • 0A Minimum Load • Efficiency Level IV Compliance • Class B EMI Applications • Portable Equipment • Peripherals and Terminals Safety Approvals • • <0.25mA Leakage Current Compact Size • • Low-power Computers Networking • cUL/UL • CE Mechanical Characteristics • Length: 81.2mm (3.20in) • Width: 50mm (1.97in) Output Specifications • • TUV Meeting Cal. Prop. 65 • • Height: 29.8mm (1.17in) Weight: 140g (4.94oz.) Max. Ripple (1) P-P (max.) Regulation Line & Load 3.0A 70mV ±5% 0A 1.25A 120mV ±5% +18V 0A 0.83A 180mV ±5% +24V 0A 0.63A 240mV ±5% Model DC Output Voltage Load Min. PSAA15W-050 +5V 0A PSAA15W-120 +12V PSAA15W-180 PSAA15W-240 Efficiency Level PSAA15W-480 +48V 0A 0.31A 480mV ±5% (1) Measured by using a 12 inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel. Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the factory and visit www.phihong.com for the most up-to-date specifications. PSAA15W Characteristics INPUT: WWW.PHIHONG.COM AC Input Voltage Rating Over Voltage Protection 100 to 240VAC By Zener clamping, adapter will be shut down AC Input Voltage Range Over Current Protection 90 to 264VAC Output equipped with short circuit protection – auto restart AC Input Frequency 47 to 63Hz Short Circuit Protection Output can be shorted without damage Input Current 0.5A (rms) max. @ 120VAC 0.25A (rms) max. @ 240VAC Leakage Current ENVIRONMENTAL: Temperature Operation Non-operation 0 to +40°C -25 to +75°C 0.25mA max. Humidity Inrush Current (cold) Operation 30A for 120VAC at max. load 60A for 240VAC at max. load (Cold start @ ambient 25°C) Emissions Input Power Saving 0.5W maximum at no load 20 to 90% FCC Class B EN55022 Class B Dielectric Withstand (Hi-pot) Test Primary to Secondary: 3000VAC for 1 minute, 10mA OUTPUT: Efficiency DC Output Connector > 74% average efficiency 2.1x5.5mm Center Positive Standard Hold-up Time Mating Connector 10mS min. @ 120VAC and max. load Kycon KLD-0202-A or equivalent Dimension Diagram Unit: mm