MEDICAL & MILITARY PMP130 Series 1 0 0 - 1 3 0 W AT T S S I N G L E O U T P U T A C / D C M E D I C A L Features • In compliance with EN61000-3-2, EN61000-3-3 and EN61000-1-1-2. • Thermal protection. • Overvoltage protection. • Overcurrent protection. • 100% burn-in at full rated load. Specifications OPERATING INPUT Input Voltage 90-264Vac Frequency 47Hz–67Hz Input Current 3.0A (rms) for 115Vac. 1.7A (rms) for 230Vac. Leakage current 90µA max. @ 115Vac. 60Hz. 150µA max. @ 230Vac. 50Hz. Isolation Input – Output: 4000VAC Input – Ground: 1500VAC Output – Ground: 500VAC Inrush Current 15A @ 115V, 30A @ 230V OUTPUT MTBF 400,000 hrs @ 25°C Efficiency 65-70% minimum. ENVIRONMENTAL Operating Temperature 0°C to 70°C Derating Derate to 50% at 60°C Storage Temperature -40°C to 85°C Relative Humidity 5%–95% non-condensing STANDARDS AND APPROVALS Safety standards UL2601-1, CSA C22.2, TUV EN60601-1 C-Tick AS/NZS CISPR11 Group 1, Class A EMC standards EN60601-1-2: 2001,EN61000-3-2, -3, EN61000-4-2, -3, -4, -5, -6, -8, -11 Output Voltage See table Output Current See table Ripple & Noise 1% peak to peak EMI standards EN55011 Class B, FCC Class B, VCCI Class B Line Regulation ±0.5% maximum at full load. MEPS compliance TBC Load Regulation See table MECHANICAL Transient Response Max. deviation 4% recovering to 1% within 500µs after 25% load charge Dimensions 178x95x63.5mm Overvoltage Protection Provided on V1 only. Set at 110%–132% of nominal. Weight 0.8kgs approx. Overcurrent Protection All outputs protected for short circuit conditions Temperature Coefficient All outputs ±0.04% per °C. Holdup Time Typically 10ms at 110VAC. PFD Signal (Optional) Power fail detection signal. TTL logic low upon loss of input power. Your dependable power partner – www.powerbox.com.au 369 MEDICAL & MILITARY PMP130 Series 1 0 0 - 1 3 0 W AT T S S I N G L E O U T P U T A C / D C M E D I C A L Selection Table MAX. MODEL OUTPUT #1 OUTPUT NUMBER VNOM IMIN IMAX TOL POWER PMP130-10 5V 0A 20A 5% 100W PMP130-10-1 7V 0A 14A 5% 100W PMP130-11 10V 0A 10A 5% 100W PMP130-12 12V 0A 10.8A 5% 130W PMP130-13 15V 0A 8.6A 4% 130W PMP130-13-1 18V 0A 7.2A 4% 130W PMP130-14 24V 0A 5.4A 3% 130W PMP130-16 30V 0A 4.3A 3% 130W PMP130-17 36V 0A 3.6A 2% 130W PMP130-18 48V 0A 2.7A 2% 130W NOTES: (1) All models are with built-in fan. (2) Models except PMP130-10, PMP130-10-1 and PMP130-11 are without remote sense. Consult Powerbox for applications requiring remote sense. Pin Chart MODEL/PIN PMP130-10 PMP130-10-1 PMP130-11 PMP130-12 PMP130-13 PMP130-13-1 PMP130-14 PMP120-16 PMP120-17 PMP120-18 Technical Illustration 370 1 2 3 4 5 6 7 8 Return -Sense Output +V Return Output +V Return Output +V +Sense Return Return Return Return Output +V Return Output +V Output +V