MEDICAL & MILITARY PMP55 Series 4 0 - 5 5 W AT T S S I N G L E & M U LT I P L E O U T P U T A C / D C M E D I C A L Features • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Short-circuit protection with auto recovery. • 100% burn-in at full rated load. Specifications OPERATING INPUT Input Voltage 85-264Vac Frequency 47Hz–67Hz Input Current 1.50A (rms) for 115Vac. 0.90A (rms) for 230Vac. MTBF 450,000 hrs @ 25°C Efficiency 65-70% minimum. ENVIRONMENTAL Operating Temperature 0°C to 70°C Leakage current 90µA max. @ 115Vac. 60Hz. 150µA max. @ 230Vac. 50Hz. Derating Derate to 50% at 70°C Isolation Input – Output: 4000Vac Input – Ground: 1500Vac Output – Ground: 500Vac Storage Temperature -40°C to 85°C Relative Humidity 5%–95% non-condensing Inrush Current 15A @ 115V, 30A @ 230V OUTPUT STANDARDS AND APPROVALS Safety standards UL2601-1, CSA C22.2, TUV EN60601-1 C-Tick AS/NZS CISPR11 Group 1, Class A EMC standards EN60601-1-2: 2001,EN61000-3-2, -3, EN61000-4-2, -3, -4, -5, -6, -8, -11 Output Voltage See table Output Current See table Ripple & Noise 1% peak to peak EMI standards EN55011 Class B, FCC Class B, VCCI Class B Line Regulation ±0.5% maximum at full load. MEPS compliance TBC Load Regulation See table MECHANICAL Transient Response Max. deviation 4% recovering to 1% within 500µs after 25% load charge Dimensions 178x95x60mm Weight 0.7kgs approx. Overvoltage Protection Provided on V1 only. Set at 110%–132% of nominal. Overcurrent Protection All outputs protected for short circuit conditions Temperature Coefficient All outputs ±0.04% per °C. Holdup Time Typically 10ms at 110VAC. Your dependable power partner – www.powerbox.com.au 361 MEDICAL & MILITARY PMP55 Series 4 0 - 5 5 W AT T S S I N G L E & M U LT I P L E O U T P U T A C / D C M E D I C A L Selection Table MAX. MODEL OUTPUT #1 OUTPUT #2 VNOM IMIN IMAX OUTPUT #3 TOL VNOM IMIN IMAX OUTPUT NUMBER VNOM IMIN IMAX TOL TOL PMP55-10 5–6V 0A 8.0A 5% 40W PMP55-10-1 6–8V 0A 7.5A 5% 45W PMP55-11 9–11V 0A 5.0A 5% 50W PMP55-12 11–13V 0A 4.6A 5% 55W PMP55-13 13–17V 0A 3.7A 3% 55W PMP55-13-1 17–21V 0A 3.1A 3% 55W PMP55-14 21–27V 0A 2.3A 3% 55W PMP55-16 27–33V 0A 1.9A 3% 55W PMP55-17 33–39V 0A 1.6A 3% 55W PMP55-18 48V 0A 1.2A 3% 55W PMP55-23 +5V 1A 5.0A 5% +12V 0.5A 3.0A 5% 45W PMP55-24 +5V 1A 5.0A 5% +15V 0.4A 2.5A 5% 45W PMP55-25 +5V 1A 5.0A 5% +24V 0.3A 2.0A 5% PMP55-31 +5V 1A 5.0A 5% +12V 0.5A 3.0A 5% -12V 0.1A 0.5A 10% 45W PMP55-32 +5V 1A 5.0A 5% +15V 0.4A 2.5A 5% -15V 0.1A 0.5A 10% 45W 45W NOTES: The output voltage of a multiple output model may go outside of the stated tolerance when an output load current is of out of stated limits. All models may be operated at no load without damage Pin Chart MODEL/PIN PMP55-10 PMP55-10-1 PMP55-11 PMP55-12 PMP55-13 PMP55-23 PMP55-24 PMP55-13-1 PMP55-14 PMP55-16 PMP55-17 PMP55-18 PMP55-25 PMP55-.31 PMP55-13 Technical Illustration 362 POWER 1 2 3 4 5 Return Return Output Return Output Common Return Common Return Output 1 Common Return Output 2 Common Return Common Return Output 1 Output 3 Output 2