MEDICAL & MILITARY PMP30 Series 2 5 - 3 0 W AT T S S I N G L E O U T P U T A C / D C M E D I C A L Features • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Short-circuit protection with auto recovery. • 100% burn-in at full rated load. Specifications OPERATING INPUT Input Voltage 90-264Vac Frequency 47Hz–67Hz Input Current 0.80A (rms) for 115Vac. 0.50A (rms) for 230Vac. Leakage current 90µA max. @ 115Vac. 60Hz. 150µA max. @ 230Vac. 50Hz. Isolation Input – Output: 4000Vac Input – Ground: 1500Vac Output – Ground: 500Vac Inrush Current 15A @ 115V, 30A @ 230V MTBF 400,000 hrs @ 25°C Efficiency 65-70% minimum. ENVIRONMENTAL Operating Temperature 0°C to 70°C Derating Derate to 50% at 70°C Storage Temperature -40°C to 85°C Relative Humidity 5%–95% non-condensing STANDARDS AND APPROVALS Safety standards UL2601-1, CSA C22.2, TUV EN60601-1 See table C-Tick AS/NZS CISPR11 Group 1, Class A Output Current See table EMC standards Ripple & Noise 1% peak to peak EN60601-1-2: 2001,EN61000-3-2, -3, EN61000-4-2, -3, -4, -5, -6, -8, -11 Line Regulation ±0.5% maximum at full load. EMI standards EN55011 Class B, FCC Class B, VCCI Class B Load Regulation See table MEPS compliance TBC Transient Response Max. deviation 4% recovering to 1% within 500µs after 25% load charge Overvoltage Protection Provided on V1 only. Set at 110%–132% of nominal. Overcurrent Protection All outputs protected for short circuit conditions Temperature Coefficient All outputs ±0.04% per °C. Holdup Time Typically 20ms at 115Vac. OUTPUT Output Voltage MECHANICAL Dimensions 147x75x42mm Weight 0.55kgs approx. Technical Illustration Your dependable power partner – www.powerbox.com.au 359 MEDICAL & MILITARY PMP30 Series 2 5 - 3 0 W AT T S S I N G L E O U T P U T A C / D C M E D I C A L Selection Table MAX. MODEL OUTPUT #1 OUTPUT NUMBER VNOM IMIN IMAX TOL POWER PMP30-10 5–6V 0A 5.0A 5% 25W PMP30-10-1 6–8V 0A 4.5A 5% 30W PMP30-11 9–11V 0A 3.4A 2% 30W PMP30-12 11–13V 0A 2.8A 2% 30W PMP30-13 13–17V 0A 2.4A 2% 30W PMP30-13-1 17–21V 0A 1.8A 2% 30W PMP30-14 21–27V 0A 1.5A 2% 30W PMP30-16 27–33V 0A 1.2A 2% 30W PMP30-17 33–39V 0A 1.0A 2% 30W PMP30-17 48V 0A 0.7A 2% 30W Pin Chart MODEL/PIN PMP30-10 PMP30-10-1 PMP30-11 PMP30-12 PMP30-13 PMP30-13-1 PMP30-14 PMP30-16 PMP30-17 PMP30-18 Technical Illustration 360 1 2 3 4 5 Return Return Output Return Output