Thyristor Module Thyristor/Diode Modules PSKT 72 /PSKH 72 Preliminary Data Sheet ITRMS I TAVM VRRM = 2x 180 A = 2x 115 A = 800 - 1800 V TO-240 AA 1 VRSM VDSM VRRM VDRM V V 900 1300 1500 1700 1900 800 1200 1400 1600 1800 Version 1 PSKT PSKT PSKT PSKT PSKT 72/08io1 72/12io1 72/14io1 72/16io1 72/18io1 -PSKH 72/12io1 -PSKH 72/16io1 -- ITRMS, IFRMS ITAVM, IFAVM TVJ = TVJM TC = 63°C; 180° sine TC = 85°C; 180° sine ITSM, IFSM TVJ = 45°C; VR = 0 (dv/dt)cr PSKT PSKT PSKT PSKT PSKT 72/08io8 72/12io8 72/14io8 72/16io8 72/18io8 PSKH 72/08io8 PSKH 72/12io8 PSKH 72/14io8 PSKH 72/16io8 PSKH 72/18io8 Maximum Ratings 180 115 85 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1700 1800 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1540 1640 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 14 450 13 500 A 2s A 2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 11 850 11 300 A 2s A 2s 150 A/µs 500 A/µs 1000 V/µs TVJ = TVJM repetitive, IT = 250 A f =50 Hz, tP =200 µs VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/µs TVJ = TVJM; VDR = 2/3 VDRM RGK = ∞; method 1 (linear voltage rise) 5 TVJ = TVJM IT = ITAVM VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 °C °C °C 3000 3600 V~ V~ t = 1 min t=1s Md Mounting torque (M5) Terminal connection torque (M5) Weight Typical including screws 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. 90 6 7 1 5 4 2 3 1 5 42 3 6 1 5 2 3 1 5 2 PSKT Version 8 PSKH Version 8 Features ● PGAV 50/60 Hz, RMS IISOL ≤ 1 mA tP = 30 µs tP = 300 µs 3 PSKH Version 1 ● W W W VISOL 4 PSKT Version 1 10 5 0.5 PGM 7 Version 8 Test Conditions (di/dt)cr 6 Type Symbol ∫i2dt 3 2 g ● l● ● ● Applications ● ● ● DC motor control Softstart AC motor controller Light, heat and temperature control Advantages ● ● Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. International standard package, JEDEC TO-240 AA Direct Copper Bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 148688 Gate-cathode twin pins for version 1 ● ● Space and weight savings Simple mounting with two screws Improved temperature and power cycling capability Reduced protection circuits 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 Symbol Test Conditions IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT, VF IT, IF = 300 A; TVJ = 25°C 1.74 V VT0 rT For power-loss calculations only (TVJ = 125°C) 0.85 3.2 V mΩ VGT VD = 6 V; IGT VD = 6 V; 2.5 2.6 150 200 V V mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM 0.2 10 V mA IL TVJ = 25°C; tP = 10 µs; VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/µs 450 mA IH TVJ = 25°C; VD = 6 V; RGK = ∞ 200 mA tgd TVJ = 25°C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/µs 2 µs tq TVJ = TVJM; IT = 150 A, tP = 200 µs; -di/dt = 10 A/µs VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM 185 µs QS IRM TVJ = TVJM; IT, IF = 50 A, -di/dt = 6 A/µs 170 45 µC A RthJC per per per per 0.3 0.15 0.5 0.25 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s 2 RthJK dS dA a Characteristic Values TVJ TVJ TVJ TVJ = = = = 5 25°C -40°C 25°C -40°C thyristor/diode; DC current module thyristor/diode; DC current module other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration typ. mA Fig. 1 Gate trigger characteristics Optional accessories for module-type PSKT 72 version 1 Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") PSKT/PSKH Version 1 PSKT Version 8 PSKH Version 8 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20