Thyristor Modules Thyristor/Diode Modules ITRMS ITAVM VRRM PSKT 161 PSKH 161 = 2x 300 A = 2x 165 A = 2000-2200 V Preliminary Data Sheet VRSM VRRM VDSM VDRM V V 2100 2300 2000 2200 Type 1 Version 1 Version 1 PSKT 161/20io1 PSKT 161/22io1 PSKH 161/20io1 PSKH 161/22io1 Symbol Test Conditions ITRMS ITAVM TVJ = TVJM TC = 85°C; 180° sine ITSM TVJ = 45°C; VR = 0 ∫i2dt (di/dt)cr (dv/dt)cr Maximum Ratings 300 165 A A t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 6000 6400 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 5250 5600 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 180000 170000 A 2s A 2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 137000 128000 A 2s A 2s 150 A/µs TVJ = TVJM; VDR = 2/3 VDRM RGK = ∞; method 1 (linear voltage rise) 1000 V/µs W W W V TVJ TVJM Tstg -40 ...125 125 -40 ...125 °C °C °C VISOL 3000 3600 V~ V~ PGAV VRGM Md Weight TVJ = TVJM IT = ITAVM 50/60 Hz, RMS IISOL ≤ 1 mA tP = 30 µs tP = 500 µs t = 1 min t=1s Mounting torque (M6) Terminal connection torque (M6) Typical including screws ● ● ● ● ● ● ● 4 3 6 7 1 5 4 2 3 1 5 42 International standard package Direct copper bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 148688 Keyed gate/cathode twin pins Motor control Power converter Heat and temperature control for industrial furnaces and chemical processes Lighting control Contactless switches Advantages ● ● ● 2.25-2.75/20-25 Nm/lb.in. 4.5-5.5/40-48 Nm/lb.in. g 125 5 Applications ● 120 60 8 10 PGM 7 Features ● A/µs 6 PSKH ● 500 3 PSKT ● TVJ = TVJM repetitive, IT = 500 A f = 50 Hz, tP = 200 µs VD = 2/3 VDRM IG = 0.5 A, non repetitive, IT = ITAVM diG/dt = 0.5 A/µs 2 ● Space and weight savings Simple mounting with two screws Improved temperature and power cycling capability Reduced protection circuits Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 Symbol Test Conditions Characteristic Values IRRM, IDRM TVJ = TVJM; VR = VRRM VT IT VT0 rT For power-loss calculations only (TVJ = TVJM) VGT VD = 6 V; IGT VD = 6 V; VGD IGD 40 = 300 A; TVJ = 25°C mA V 1.36 0.8 1.6 V mΩ 2 2.6 150 200 V V mA mA TVJ = TVJM; VD = 2/3 VDRM TVJ = TVJM; VD = 2/3 VDRM 0.25 10 V mA IL TVJ = 25°C; VD = 6 V; tP = 30 µs diG/dt = 0.45A/µs; IG = 0.45 A 200 mA IH TVJ = 25°C; VD = 6 V; RGK = ∞ 150 mA tgd TVJ = 25°C; VD = 1/2 VDRM diG/dt = 0.5 A/µs; IG = 0.5 A 2 µs tq TVJ = TVJM; VR = 100 V; VD = 2/3 VDRM; tP = 200 µs dv/dt = 20 V/µs; IT = 160 A; -di/dt = 10A/µs 150 µs QS IRM TVJ = TVJM -di/dt = 50 A/µs; IT = 300 A 550 235 µC A RthJC per per per per 0.155 0.078 0.225 0.113 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 RthJK dS dA a TVJ TVJ TVJ TVJ = = = = 25°C -40°C 25°C -40°C typ. thyristor; DC current module thyristor; DC current module Creeping distance on surface Creepage distance in air Maximum allowable acceleration Fig. 1 Gate trigger characteristics Optional accessories for modules Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 180L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 180R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") RthJC for various conduction angles d: d DC 180° 120° 60° 30° RthJC (K/W) d 0.155 0.167 0.175 0.197 0.226 DC 180° 120° 60° 30° Constants for ZthJC calculation: i 1 2 3 RthJK for various conduction angles d: Rthi (K/W) ti (s) 0.0072 0.0188 0.129 0.001 0.08 0.2 RthJK (K/W) 0.225 0.237 0.245 0.262 0.296 Constants for ZthJK calculation: i 1 2 3 4 Rthi (K/W) ti (s) 0.0072 0.0188 0.129 0.07 0.001 0.08 0.2 1.0 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20