05267 EM02-100 EMI FILTER/TVS ARRAY APPLICATIONS ✔ ✔ ✔ ✔ ✔ ✔ Cellular Phones Color LCD Display Panel Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards IEC COMPATIBILITY (EN61000-4) SOT-563 ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns FEATURES ✔ ESD Protection > 25 kilovolts ✔ EMI Filtering/TVS Low Pass Filters ✔ > 25db Attenuation from 800MHz to 3GHz ✔ Protects up to Two(2) Data Lines ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ SOT-563 Package ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ Device Marking: Marking Code ✔ 8mm Tape and Reel Per EIA Standard 481 PIN CONFIGURATION For Each Line I/On 100 Ohm I/On 15pF 15pF GND 05267.R0 5/07 1 www.protekdevices.com EM02-100 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature SYMBOL VALUE UNITS TL -40°C to 85°C °C TSTG -55°C to 150°C °C DC Power Per Resistor P 400 mW Typical Resistance @ ± 20% R 100 OHMS Soldering Temperature for 10 seconds TL 265 °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER EM02-100 DEVICE MARKING CODE M02 @ 25°C Unless Otherwise Specified CUT-OFF FREQUENCY (50 OHMS I/O) ZERO BIAS RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION TYPICAL CAPACITANCE (See Note 1) VWM VOLTS @ 1mA V(BR) VOLTS @3V ID µA @10mA VF VOLTS @ 800-3000 MHz dB fC MHz @2.5V, 1MHz C pF 5.0 6.0 0.1 0.8 25 110 30 Note 1: 50pF @ 0V, 1MHz, ± 20% tolerance. 0 FIGURE 1 TYPICAL FILTER PERFORMANCE (TA = 25C, DC BIAS = 0V, 50OHM ENVIRONMENT) Insertion Loss - dB -10 -20 -30 -40 1 05267.R0 5/07 10 100 Frequency - MHz 2 1000 10000 www.protekdevices.com EM02-100 GRAPHS FIGURE 1 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25°C) Normalized Resistance 1.100 1.060 1.020 0.980 0.940 0.900 -40 -20 0 20 40 Temperature °C 60 80 100 FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25°C) 1.6 Cj - Capacitance (Normalized) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (through the filter) 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform) 05267.R0 5/07 3 www.protekdevices.com EM02-100 SOT-563 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-563 A 6 5 C K 4 S B 1 2 PACKAGE DIMENSIONS 3 D G A B C D G J K J 1.50 1.10 0.50 0.17 0.50 BSC 0.08 0.10 1.50 S MOUNTING PAD 1. 2. 3. 4. 5 TYPICAL 0.012 0.040 0.020 0.055 0.020 0.059 0.043 0.020 0.007 0.020 BSC 0.003 0.004 0.059 0.067 0.051 0.024 0.011 0.007 0.012 0.067 Dimensioning and tolerances per ANSI Y14.5M, 1985. Controlling Dimension: Inches Pin 3 is the cathode (Unidirectional Only). Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 2 1 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., EM02-100-T7. 3. Suffix - LF = Lead-Free, Pure Tin Plating, i.e., EM02-100-LF-T7. 4 3 0.30 1.02 0.51 1.40 0.51 1.70 1.30 0.60 0.27 0.18 0.30 1.70 NOTES DIM Millimeters Inches 1 2 3 4 5 INCHES MIN MAX MILLIMETERS MIN MAX DIM Outline & Dimensions: Rev 1 - 9/05, 06051 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 1.78 ± 0.05 1.78 ± 0.05 0.69 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t P2 D tmax 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Pin 1 Indicated by Dot Top cover tape A0 F W K0 B0 P User Direction of Feed COPYRIGHT © ProTek Devices 2006 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05267.R0 5/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com