SMT POWER INDUCTORS Flat Coils - PG0426NL Series Height: 3.2mm Max Footprint: 7.5mm x 7.0mm Max Current Rating: 60Apk RoHS compliant Low DC Resistance High temperature core material, no thermal aging below 150°C Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C 1 Inductance @0A D C (μH ±20%) TYP PG0426.101NL 0.10 1.3 PG0426.151NL PG0426.201NL PG0426.221NL PG0426.331NL PG0426.471NL PG0426.681NL PG0426.821NL PG0426.102NL PG0426.152NL 0.15 0.20 0.22 0.33 0.47 0.68 0.82 1.00 1.50 2.0 2.0 2.0 3.2 3.2 5.2 7.8 7.8 11.5 Part 6 Number MAX Saturation 2 Current Isat (A) Heating 3 Current I D C (A) Core Loss 4 Factor K2 1.5 60 34.5 44.4 2.2 2.2 2.2 3.4 3.4 5.4 8.0 8.0 11.8 57 46 40 34 26 25 24 22 18 26.0 26.0 26.0 20.0 20.0 15.5 13.0 13.0 9.0 40.0 53.3 58.6 62.8 89.4 100.6 99.3 121.1 153.6 DCR (m Ω) Schematic Mechanical .295 MAX 7,50 .276 7,00 MAX .071 1,80 1 .118 3,00 PG0426.XXXNL Date Code Country of Origin 2 .146 3,70 SUGGESTED PAD LAYOUT .126 3,20 MAX .134 3,40 Weight......................0.6 grams Tape & Reel ..............1400/reel Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .280 7,10 TAPE & REEL LAYOUT .472 12,00 .630 ± .012 16,00 ± 0,30 USER DIRECTION OF FEED USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com P649.B (4/07) SMT POWER INDUCTORS Flat Coils - PG0426NL Series Notes from Tables 1. The temperature of the component (ambient plus temperature rise) must be within the standard operating temperature range. 2. The saturation current, ISAT, is the current at which the component inductance drops by 30% (typical) at an ambient temperature of 25°C. This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 3. The heating current, IDC, is the DC current required to raise the component temperature by approximately 40°C. The heating current is determined by mounting the component on a typical PCB and applying current for 30 minutes. The temperature is measured by placing the thermocouple on top of the unit under test. Take note that the component’s performance varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 4. Core loss approximation is based on published core data: Core Loss = K1 * (f)1.33 * (K2ΔI)2.51 Where: Core Loss = in Watts K1= 8.75E-12 f = switching frequency in kHz K1 & K2 = core loss factors ΔI = delta I across the component in Ampere ΔI = one half of the peak to peak flux density K2Δ across the component in Gauss 5. Unless otherwise specified, all testing is made at 100kHz, 0.1VAC. 6. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. PG0426.101NL becomes PG0426.101NLT). Pulse complies to industry standard tape and reel specification EIA481. Inductance vs Current Characteristics Typical Core Loss vs Peak Flux Density 1.40 1.0 PG0426.102NL 0.9 100kHz 1.20 200kHz 0.7 CORE LOSS (W) INDUCTANCE (µH) 0.8 PG0426.681NL 0.6 0.5 0.4 PG0426.331NL 0.3 1.00 300kHz 400kHz 0.80 500kHz 1MHz 0.60 0.40 PG0426.201NL 0.2 0.20 PG0426.101NL 0.1 0.00 0.0 1 4 7 10 13 16 19 22 25 28 3 34 3 40 43 46 49 100 52 200 300 400 DC BIAS (A) 500 600 700 800 900 1000 DELTA B (GAUSS) Delta B = (K2DI) COMPONENT TEMP. RISE (°C) Typical Component Temperature vs DC Bias Current 120 PG0426.102NL PG0426.681NL PG0426.152NL 100 PG0426.331NL PG0426.471NL PG0426.151NL PG0426.201NL PG0426.221NL 80 PG0426.101NL 60 40 20 0 0 6 12 18 24 30 DC BIAS (A) 36 42 48 54 For More Information: Pulse Worldwide Headquarters Pulse Europe 12220 World Trade Dr. San Diego, CA 92128 U.S.A. www.pulseeng.com Einsteinstrasse 1 D-71083 Herrenberg Germany Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 7032 7806 0 Fax: 49 7032 7806 12 Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Tech-Innovation International Tenth Kejinan Rd. High-Tech Industrial Park Nanshan District, Shenzhen China Tel: 86 755 33966678 Fax: 86 755 33966700 Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Rd. Yang Mei Chen Tao Yuan Hsien Taiwan, R. O. C. Tel: 86 21 54643211/2 Fax: 86 21 54643210 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4641811 Fax: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2007. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com P649.B (4/07)