RECTRON BAV16W SEMICONDUCTOR TECHNICAL SPECIFICATION SMALL SIGNAL DIODE VOLTAGE RANGE 75 Volts CURRENT 150mAmpere FEATURES * * * * * * Compact surface mount with same foot print as mini-melf High Breakdown Voltage Fast Switching Speed 400mW Power Dissipation General Purpose Switching Applications High Conductance SOD-123 MECHANICAL DATA Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.01 gram .110(2.80) .102(2.60) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .006(.15) .026(.65) .018(.45) .067(1.70) .059(1.50) .152(3.85) .140(3.55) .003(.08) * * * * * .049(1.25) .041(1.05) Ratings at 25 o C ambient temperature unless otherwise specified. REF .020(0.50) Single phase, half wave, 60 Hz, resistive or inductive load. .004(.10) .000(.00) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS Non-Repetitive Peak Reverse Voltage Maximum Repetitive Peak Reverse Voltage Maximum Working Peak reverse Voltage Maximum DC Blocking Voltage Maximum RMS Voltage Maximum Forward Comtinuous Current Maximum Average Forward Rectified Current Non-Repetitive Peak Forward Surge Current @t=1.0uS @t=1.0S SYMBOL BAV16W UNITS VRM VRRM VRWM VR VRMS IFM IO 100 Volts 75 Volts 53 300 150 mAmps mAmps Volts IFSM 2.0 1.0 Amps Typical Reverse Recovery Time (Note 1) Trr 4 nS Typical Junction Capacitance (Note 2) CJ 2 pF Maximum Power Dissipation (Note 3) PD R θJA 400 mW Typical Thermal Resistance Operating and Storage Temperature Range TJ, TSTG ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Instantaneous Forward Voltage @IF=1.0mA @IF=10mA @IF=50mA @IF=150mA Maximum Instantaneous Reverse Current @VR=20V, @VR=75V, @VR=25V, @VR=75V, TJ=25 O C TJ=25 O C TJ=150 O C TJ=150 O C 315 -65 to + 150 O C/W O C BAV16W UNITS VF 0.715 0.855 1.0 25 Volts IR 1.25 1.0 30 50 nAmps uAmps uAmps uAmps . Measured at I F =I R =10mA, I RR =0.1I R And R L =100 NOTES : 1. . 2. Measured at 1MHz and applied reverse voltage of 0 volts. 3. Part mounted on FR-4 PC board with minimunm recommended pad layout. 2006-3 RATING AND CHARACTERISTICS CURVES ( BAV16W ) IF, INSTANTANEOUS FORWARD CURRENT(mA) PD, POWER DISSIPATION (mW) 500 400 300 200 100 1000 100 10 1.0 0.1 .01 0 0 25 50 75 100 125 150 175 0 1 2 VF, INSTANTANEOUS FORWARD VOLTAGE(V) O T A, AMBIENT TEMPERATURE( C) FIG.2 FORWARD CHARACTERISTICS FIG.1 FORWARD DERATING CURVE IR, LEAKAGE CURRENT (nA) 10,000 1,000 100 10 1 0 100 180 O TJ, JUNCTION TEMPERATURE( C) FIG.3 LEAKAGE CURRENT VS. JUNCTION TEMPERATURE RECTRON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. RECTRON