ALUMINUM ELECTROLYTIC CAPACITORSRoHS VEB Series: Surface Mount Type, Bi-Polar FEATURES •85°C, 2000 hours assured. •5.5mm height •Bipolar capacitor, replaces RVB Series •RoHS Compliant SPECIFICATIONS Item Performance -40°C ~ + 85°C Operating Temp. Range Capacitance Tolerance ± 20% (120Hz, 20°C) Leakage Current (at 20•C) I=0.01CV or 3 ìA (whichever is greater) after 2 minutes Where C=rated capacitance in ìF.Voltage=rated DC working voltage in V. Dissipation Factor Rated Voltage Tan Tan 6.3 10 16 25 35 50 4 0.35 0.30 0.25 0.25 0.25 0.25 5 ~ 6.3 0.30 0.25 0.20 0.15 0.15 0.15 (max) at 120 Hz, 20°C Rated Voltage Low Temperature Impedance Ratio Characteristics (at 120Hz) 6.3 10 16 25 35 50 Z(-25°C) /Z(+20°C) 3 3 2 2 2 2 Z(-40°C) /Z(+20°C) 8 5 4 3 3 3 Load Life Shelf Life 2000 Hrs 1000 Hrs Capacitance Change Within ±20% of initial value Within ± 20% of initial value Dissipation Factor Less than 200% of specified value Less than 200% of specified value Leakage Current Within specified value Within specified value Test Conditions 20°C (after rated voltage applied for 2000 hours at 85°C 20° C (after storage for 1000 hours at 85°C without voltage) Test Time Life Test 50 120 1K 10K up Riple Current & Under 16 0.80 1.00 1.15 1.25 Temperature Multipliers 25 ~ 35 0.80 1.00 1.25 1.40 50 0.80 1.00 1.35 VDC(V) Freq. (Hz) Ripple Current & Frequency Multilpiers Standards Multipliers 1.35 85 1.00 1.50 JIS C 5101-1,-18 DIMENSION & PERMISSIBLE RIPPLE CURRENT F 0.1 Temperature (°C) Under 70 VDC Contents 6.3V (0J) D x L 10V (1A) D x L mA 16V (1C) Dx L mA 25V (1E) mA D x L mA Ripple Current mA/rms at 120 Hz, 85°C 35V (1V) D x L mA 50V (1H) D x L mA 0R1 4 x 5.3 2.3 0.22 R22 4 x 5.3 3.3 0.33 R33 4 x 5.3 4.1 0.47 R47 4 x 5.3 4.9 1 010 4 x 5.3 7.2 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 5 x 5.3 27 6.3 x 5.3 40 6.3 x 5.3 45 33 330 6.3 x 5.3 45 6.3 x 5.3 50 6.3 x 5.3 55 47 470 6.3 x 5.3 54 4 x 5.3 18 4 x 5.3 10 5 x 5.3 14 4 x 5.3 13 5 x 5.3 17 5 x 5.3 17 6.3 x 5.3 24 4 x 5.3 14 5 x 5.3 20 5 x 5.3 21 5 x 5.3 26 6.3 x 5.3 35 6.3 x 5.3 35 PAD SPACING AND DIAMETER L A±0.2 B±0.2 C±0.2 W P±0.2 4 5.3±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 PART NUMBER EXAMPLE VEB 100 M 1E TR 063 053 0.3 max B D±0.5 + - L W A C RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] P C C1CB05 REV 2010.10.10