RFHIC AP112

MMIC
AP112
Product Features
Application
• DC ~ 500MHz
• GaAs HBT MMIC
• 40dBm Output IP3
• 18dB Gain
• 19.8dBm P1 dB
• Pb Free / RoHS Standard
• CDMA,W-CDMA Medium Power Amplifier
• High Linearity Drive Amplifier
Package Type: SOT-89
Description
AP112 is a gain block amplifier designed with GaAs HBT MMIC in a low cost SOT-89 package.
This MMIC amplifier is designed for use as driver devices for infrastructure equipment in the DC~500MHz
ELECTRICAL CHARACTERISTICS
Absolute Minimum and Maximum Ratings
PARAMETER
UNIT
Device Voltage
VDC
+5.5
RF Input Power
dBm
+10
Storage Temperature
℃
MIN
MAX
-40
+150
Operating Ranges
PARAMETER
UNIT
MIN
Operating Frequency
MHz
DC
Device Voltage
VDC
Case Temperature
℃
TYP
MAX
500
+5
+5.3
-40
+85
(Ta=+25℃, VDD=+5V, +4.7V, Fc=70 MHz)
Electrical Specifications
PARAMETER
UNIT
MIN
TYP
Gain
dB
17.8
18
17.8
Input Return Loss
dB
-14
-13.6
Output Return Loss
dB
-12
-11.7
Output IP3
dBm
40.5
37
1dB Compression Point
dBm
19.8
18.6
Noise Figure
dB
2.9
3.1
2.8
DC Current
mA
110
130
75
Supply Voltage
VDC
38
90
+5V
MAX
TYP
+4.7V
OIP3 is measured with two tones, at an output power of 5dBm/tone separated by 1MHz
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 6.0
MMIC
AP112
Block Diagram
Application Circuit
Recommended Bias Resistor Values
Vsupply
Rbias(5V)
Rbias(4.8V)
Rbias(4.5V)
6V
10
15
33
7V
20
28
55
8V
30
41
77
9V
40
53
57
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 6.0
MMIC
AP112
Performance Charts (Vd=5V, Id=110mA, Tc=25℃)
Frequency
MHz
50
100
150
200
250
300
350
400
450
500
Gain
dB
17.96
17.97
17.97
18
17.98
18
18
17.98
17.96
17.96
S11
dB
-13.9
-14.4
-14.9
-15.7
-16.9
-18.4
-19.7
-21.5
-22.2
-20.7
S22
dB
-11.9
-12.3
-12.7
-13.5
-14.5
-15.9
-17.3
-19.1
-19.5
-18.1
OIP3
dBm
41.1
40.5
40.8
40.1
39.6
40.1
39.6
41.2
41.6
39.9
P1dB
dBm
19.8
19.9
19.9
20
20
20
20.1
20.1
19.9
19.8
Noise Figure
dB
2.85
2.94
3.01
3.06
3.11
3.18
3.21
3.26
3.31
3.36
OIP3 vs. Frequency
0
43
18
-5
41
17
-10
16
-15
15
-20
14
-25
500
OIP3(dBm)
19
Return Loss(dB)
Gain(dB)
S-Parameter vs. Frequency
39
37
35
50
140
230
320
410
33
50
Freq(MHz )
S 21
S 11
100
150
200
250
300
350
400
450
500
400
450
500
Freq(MHz)
S22
P1dB vs. Frequency
Noise Figure vs. Frequency
22
4
P1dB(dBm)
NF(dB)
3
2
20
18
1
0
16
50
140
230
320
410
500
50
100
150
200
Freq(MHz)
250
300
350
Freq(MHz)
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 6.0
MMIC
AP112
Performance Charts (Vd=4.7V, Id=75mA, Tc=25℃)
Frequency
MHz
50
100
150
200
250
300
350
400
450
500
Gain
dB
17.84
17.83
17.83
17.85
17.86
17.87
17.88
17.91
17.84
17.86
S11
dB
-13.6
-14
-14.5
-15.3
-16.3
-17.8
-19.1
-20.7
-21.7
-20.5
S22
dB
-11.6
-11.8
-12.4
-13.2
-14.1
-15.4
-16.8
-18.3
-19.1
-17.9
OIP3
dBm
37.5
37
37.3
36.9
36.8
36.7
36.5
37.1
37.7
37.4
P1dB
dBm
18.6
18.6
18.6
18.6
18.8
18.6
18.7
18.7
18.7
18.7
Noise Figure
dB
2.8
2.84
2.92
3
3.04
3.12
3.16
3.23
3.27
3.32
OIP3 vs. Frequency
0
43
18
-5
41
17
-10
16
-15
15
-20
14
-25
500
OIP3(dBm)
19
Return Loss(dB)
Gain(dB)
S-Parameter vs. Frequency
39
37
35
50
140
230
320
410
33
Freq(MHz )
S21
50
S11
100
150
200
250
300
350
400
450
500
400
450
500
Freq(MHz)
S22
Noise Figure vs. Frequency
P1dB vs. Frequency
22
4
P1dB(dBm)
NF(dB)
3
2
20
18
1
16
0
50
140
230
320
410
500
50
100
150
200
250
300
350
Freq(MHz)
Freq(MHz )
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 6.0
MMIC
AP112
Package Dimensions (Type: SOT-89)
Pin No
Function
1
Input
2
Ground
3
Output/Bias
4
Ground
! ESD sensitive
Observe precautions for handling, testing
and packaging.
Recommended Pattern
Recommended Mounting Configuration
RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not
assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or
incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for
inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not
intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells
such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders,
employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of
whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 6.0