FPD2250 FPD22501.5W Power pHEMT 1.5W POWER pHEMT Package Style: Bare Die Product Description Features The FPD2250 is an AlGaAs/InGaAs pseudomorphic High Electron Mobility Transistor (pHEMT), featuring a 0.25μmx2250μm Schottky barrier gate, defined by highresolution stepper-based photolithography. The recessed gate structure minimizes parasitics to optimize performance. The epitaxial structure and processing have been optimized for reliable high-power applications. The FPD2250 is also available in the low-cost plastic SOT89 package. 32dBm Linear Output Power at 12GHz 7.5dB Power Gain at 12GHz 42dBm OIP3 45% Power-Added Efficiency Applications Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS 9 SiGe HBT GaAs pHEMT Si CMOS Narrowband and Broadband High-Performance Amplifiers SATCOM Uplink Transmitters PCS/Cellular Low-Voltage High-Efficiency Output Amplifiers Medium-Haul Digital Radio Transmitters Si BJT GaN HEMT InP HBT RF MEMS LDMOS Min. Specification Typ. P1dB Gain Compression 31.0 32.0 dBm VDS =8V, IDS =50% IDSS Maximum Stable Gain (S21/S12) Power Gain at P1dB (G1dB) 8.0 6.5 9.0 7.5 dB dB VDS =8V, IDS =50% IDSS VDS =8V, IDS =50% IDSS Parameter Max. Unit Condition Electrical Specifications Power-Added Efficiency (PAE) 45 % OIP3 40 42 dBm dBm VDS =8V, IDS =50% IDSS Matched for optimal power, tuned for best IP3 mA mA VDS =1.3V, VGS =0V VDS =1.3V, VGS ≈+1V 600 ms VDS =1.3V, VGS =0V 10 |1.0| μA V VGS =-5V VDS =1.3V, IDS =2.25mA |12.0| |14.0| V IGS =2.25mA |14.5| |16.0| V IGD =2.25mA 30 °C/W Saturated Drain-Source Current (IDSS) Maximum Drain-Source Current (IMAX) 560 Transconductance (GM) Gate-Source Leakage Current (IGSO) Pinch-Off Voltage (VP) Gate-Source Breakdown Voltage (VBDGS) Gate-Drain Breakdown Voltage (VBDGD) Thermal Resistivity (θJC) 700 1125 825 VDS =8V, IDS =50% IDSS, POUT =P1dB VDS >6V Note: TAMBIENT =22°C, RF specifications measured at f=12GHz using CW signal. RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. Rev A1 DS090612 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 1 of 4 FPD2250 Absolute Maximum Ratings1 Parameter Rating Caution! ESD sensitive device. Unit Drain-Source Voltage (VDS) (-3V<VGS <-0.5V)2 10 V Gate-Source Voltage (VGS) (0V<VDS <+8V) -3 V Drain-Source Current (IDS) (For VDS <2V) IDSS Gate Current (IG) (Forward or reverse current) 20 mA RF Input Power (PIN) (Under any acceptable bias state) 26.5 dBm Channel Operating Temperature (TCH) (Under any acceptable bias state) 175 °C -65 to 150 °C Total Power Dissipation (PTOT)3, 4, 5 5.0 W Simultaneous Combination of Limits6 (2 or more max. limits) 80 % Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). Storage Temperature (TSTG) (Non-Operating Storage) The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Notes: 1TAMBIENT =22°C unless otherwise noted; exceeding any one of these absolute maximum ratings may cause permanent damage to the device. 2 Operating at absolute maximum VD continuously is not recommended. If operation at 10V is considered then IDS must be reduced in order to keep the part within its thermal power dissipation limits. Therefore VGS is restricted to <-0.5V. 3Total Power Dissipation to be de-rated as follows above 22°C: P TOT =5.0(0.033W/°C)xTHS, where THS =heatsink or ambient temperature above 22°C. Example: For a 85°C carrier temperature: PTOT =5.0-(0.033x(85-22))=2.9W 4 Total Power Dissipation (PTOT) defined as (PDC +PIN)–POUT, where PDC: DC Bias Power, PIN: RF Input Power, POUT: RF Output Power. 5Users should avoid exceeding 80% of 2 or more Limits simultaneously. 6Thermal Resistivity specification assumes a Au/Sn eutectic die attach onto an Auplated copper heatsink or rib. Pad Layout Pad A1 A2 B1 B2 C Description Gate Pad Gate Pad Drain Pad Drain Pad Source Pad Pin Coordinates (μm) 130, 460 130, 220 380, 450 380, 230 Note: Coordinates are referenced from the bottom left hand corner of the die to the center of the bond pad opening. 2 of 4 Die Size (μm) Die Thickness (μm) Min. Bond Pad Opening (μmxμm) 470x680 75 64x77 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Rev A1 DS090612 FPD2250 Preferred Assembly Instructions GaAs devices are fragile and should be handled with great care. Specially designed collets should be used where possible. The back of the die is metallized and the recommended mounting method is by the use of conductive epoxy. Epoxy should be applied to the attachment surface uniformly and sparingly to avoid encroachment of epoxy onto the top face of the die. Ideally it should not exceed half the chip height. For automated dispense Ablestick LMISR4 is recommended and for manual dispense Ablestick 84-1 LMI or 84-1 LMIT are recommended. These should be cured at a temperature of 150°C for one hour in an oven especially set aside for epoxy curing only. If possible the curing oven should be flushed with dry nitrogen. The gold-tin (80% Au 20% Sn) eutectic die attach has a melting point of approximately 280°C but the absolute temperature being used depends on the leadframe material used and the particular application. The maximum time at used should be kept to a minimum. This part has gold (Au) bond pads requiring the use of gold (99.99% pure) bondwire. It is recommended that 25.4mm diameter gold wire be used. Recommended lead bond technique is thermocompression wedge bonding with 0.001” (25µm) diameter wire. Bond force, time stage temperature and ultrasonics are all critical parameters and the settings are dependent on the setup being used and application. Ultrasonic or thermosonic bonding is not recommended. Bonds should be made from the die first and then to the mounting substrate or package. The physical length of the bondwires should be minimized especially when making RF or ground connections. Handling Precautions To avoid damage to the devices, care should be exercised during handling. Proper Electrostatic Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and testing. These devices should be treated as Class 0 (0V to 250V) using the human body model as defined in JEDEC Standard No. 22-A114. Further information on ESD control measures can be found in MIL-STD-1686 and MIL-HDBK-263. This is an unpackaged part and therefore no MSL rating applies. Application Notes and Design Data Application Notes and design data including S-parameters and device model are available on request and from www.rfmd.com. Reliability An MTTF of 4.2 million hours at a channel temperature of 150°C is achieved for the process used to manufacture this device. Disclaimers This product is not designed for use in any space-based or life-sustaining/supporting equipment. Ordering Information Rev A1 DS090612 Delivery Quantity Ordering Code Full Pack (100) FPD2250-000 Small Quantity (25) FPD2250-000SQ Sample Quantity (3) FPD2250-000S3 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 3 of 4 FPD2250 4 of 4 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Rev A1 DS090612