RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ ■ ■ ■ Änderungen vorbehalten / subject to change without notice AS-120P 120W AC-DC Single Output Desktop series Features : 3 pole AC inlet IEC320-C14 Built-in active PFC function, PF>0.95 Protections: Short circuit/ Over load/ Over voltage/Over temperature 3 High power density 5w/in Fully enclosed plastic case Approvals: UL/ CUL/ TUV/ CB/ CE No load power consumption<0.75W@240VAC ZCS/ZVS technology to reduce power dissipation 2 years warranty R SPECIFICATION MODEL AS-120P-12 AS-120P-15 AS-120P-20 AS-120P-24 AS-120P-48 AS120P15R7B AS120P20P1M AS120P24P1M AS120P48P1M Note.2 12V 15V 20V 24V 48V RATED CURRENT 8.4A 6.7A 6A 5A 2.5A CURRENT RANGE 0~ 8.4A 0 ~ 6.7A 0 ~ 6A 0 ~ 5A 0 ~ 2.5A RATED POWER 100W DC VOLTAGE RIPPLE & NOISE (max.) Note.3 100mVp-p 11 ~ 13.5V VOLTAGE ADJ. RANGE 100W 120W 120W 120W 100mVp-p 200mVp-p 200mVp-p 240mVp-p 13.5 ~ 16.5V 18 ~ 22V 21.6 ~ 26.4V 43.2 ~ 52.8V Fixed output by customer choose 4.0% VOLTAGE TOLERANCE Note.4 4.0% INPUT geprUfre Sicherheit AS120P12R7B ORDER NO. OUTPUT TUV Rheinland Product Safety 3.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 3.5% 3.0% 2.5% 2.0% 2.0% SETUP, RISE TIME 3000ms, 80ms at full load HOLD TIME (Typ.) 50ms/230VAC VOLTAGE RANGE 90 ~ 264VAC 16ms/115VAC at full load 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF EFFICIENCY (Typ.) 85.5% AC CURRENT (Typ.) 1.4A/115VAC INRUSH CURRENT (Typ.) 120A/230VAC LEAKAGE CURRENT (max.) <1mA / 240VAC OVER LOAD 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE OVER TEMPERATURE 0.95/230VAC PF 0.98/115VAC at full load 87.5% 14 ~ 16.8V 22.5 ~ 28V 17 ~ 21V Protection type : Shut down o/p voltage, re-power on to recover 90 15 89% 27 ~ 33.6V 53.3 ~ 67.2V (RTH2) Detect on heatsink of power transistor 0 ~ + 50 WORKING HUMIDITY 20% ~ 90% RH non-condensing SAFETY STANDARDS 90% Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 89.5% 0.7A/230VAC (Refer to output load derating curve) -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 3AXES 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved WITHSTAND VOLTAGE I/P-O/P:4.25KVDC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms EMI CONDUCTION & RADIATION Compliance to EN55022(CISPR22) class B, FCC part 15J class B EMC (Note. 7) OTHERS CONNECTOR NOTE HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY LIFE Average life expectancy of 6 years (12 hours / day, 70% load, 115VAC) MTBF 308.9K hrs min. DIMENSION PACKING PLUG 167*67*35mm (L*W*H) 0.52Kg; 30pcs/16.6Kg/1.1CUFT Standard type R7B,P2M: 2.5 * 5.5 CABLE Standard type 120cm of SPT-1, 16Awg*2c for stock ; Other type available by customer requested Compliance to EN61000-4-2,3,4,5,6,8,11, Light industry level, criteria A MIL-HDBK-217F (25 ) * 11mm, center positive for stock ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH. Ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. AS-120P 120W AC-DC Single Output Desktop Mechanical Specification Case No.947A series Unit:mm 167 35 67 1200 50 2 3 1 4 16AWG 2C 167 35 67 1200 50 11 C"+" Outside 16AWG 2C Inside Plug Assignment Standard plug(For 20V,24V,48V only) Standard plug(For 12V,15V only) 11 R7B PIN NO OUTPUT 2 1 3 4 C"+" P1M 1,4 +V 2,3 -V P/N OUTPUT CENTER + ID 2.5 x OD 5.5 Outside Derating Curve Inside Static Characteristics Ta=25 100 100 90 80 80 70 50 LOAD (%) LOAD (%) 60 40 20 0 10 20 30 40 50 AMBIENT TEMPERATURE ( 70 60 60 50 40 (HORIZONTAL) 90 ) 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:AS-120P-SPEC 2006-11-17 RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ Änderungen vorbehalten / subject to change without notice ■ ■ ■