RSG SP-200

RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
ELECTRONIC COMPONENTS
■
■
■
■
Änderungen vorbehalten / subject to change without notice
SP-200
200W Single Output with PFC Function
series
Features :
Universal AC input / full range
Built-in active PFC function, PF>0.93
Protections:Short circuit/Over load/Over voltage/Over temperature
Built-in cooling fan speed control
Built-in constant current limiting circuit
Built-in fan speed control
Remote ON-OFF control(Optional)
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at PFC:67KHz PWM:134KHz
3 years warranty
R
SPECIFICATION
MODEL
SP-200-3.3
SP-200-5
SP-200-7.5
SP-200-12
SP-200-13.5 SP-200-15
SP-200-24
SP-200-27
SP-200-48
DC VOLTAGE
3.3V
5V
7.5V
12V
13.5V
15V
24V
27V
48V
RATED CURRENT
40A
40A
26.7A
16.7A
14.9A
13.4A
8.4A
7.5A
4.2A
CURRENT RANGE
0 ~ 40A
0 ~ 40A
0 ~ 26.7A
0 ~ 16.7A
0 ~ 14.9A
0 ~ 13.4A
0 ~ 8.4A
0 ~ 7.5A
0 ~ 4.2A
RATED POWER
132W
200W
200.2W
200.4W
201.1W
201W
201.6W
202.5W
201.6W
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
150mVp-p
150mVp-p
250mVp-p
RIPPLE & NOISE (max.) Note.2 100mVp-p
OUTPUT
INPUT
VOLTAGE ADJ. RANGE
7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V
2.0%
2.0%
2.0%
2.0%
2.0%
2.0%
1.0%
1.0%
1.0%
LINE REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
LOAD REGULATION
1.0%
1.0%
1.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
SETUP, RISE TIME
600ms, 30ms at full load
HOLD TIME (Typ.)
20ms at full load
VOLTAGE RANGE
85 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.93/230VAC
EFFICIENCY (Typ.)
65%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
3.5A/115VAC
1.7A/230VAC
COLD START 40A/230VAC
LEAKAGE CURRENT
<2mA / 240VAC
OVER LOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
FUNCTION
3.14 ~ 3.63V 4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3
120 ~ 370VDC
PF>0.98/115VAC at full load
71%
76%
79%
80%
81%
83%
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY & ISOLATION RESISTANCE
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
95
5
(TSW1 : Detect on heatsink of power transistor)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
20 ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
0.05%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 and S-MARK J60950 Approved
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
(Note 4)
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
EMS IMMUNITY
MTBF
183.8K hrs min. MIL-HDBK-217F (25 )
OTHERS
DIMENSION
199*99*50mm (L*W*H)
PACKING
0.85Kg; 20pcs/17.9Kg/1.28CUFT
NOTE
84%
REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF
-10 ~ +60 (Refer to output load derating curve)
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
EMC
83%
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:SP-200-SPEC 2006-03-07
SP-200
200W Single Output with PFC Function
Mechanical Specification
Case No. 916B
series
Unit:mm
199
20
35
133
25
117
70
65
35.2
CN1
1
2
+V ADJ.
9.5
6
79
5
2-M4 L=5mm
119
51
LED
7
99
R.C.
48.5
4
49.5
3
8
2
38
5-M3 L=3mm
16
10
1
15
142
25
50
12.5
25
25
Air flow
direction
4-M4 L=6mm
Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional)
Terminal pin number assignment :
Pin No.
1
2
3
Assignment
AC/L
AC/N
FG
Pin No.
4,5
6,7
Assignment
DC OUTPUT -V
DC OUTPUT +V
Derating Curve
Pin No.
1
2
Assignment
RC+
RC-
Mating Housing
Terminal
JST XHP
or equivalent
JST SXH-001T-P0.6
or equivalent
Output Derating VS Input Voltage
Ta=25
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-10
0
10
20
30
40
AMBIENT TEMPERATURE (
50
60
60
50
40
(HORIZONTAL)
85
100
115
135
155
230
264
INPUT VOLTAGE (VAC) 60Hz
)
File Name:SP-200-SPEC 2006-03-07
RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
ELECTRONIC COMPONENTS
■
Änderungen vorbehalten / subject to change without notice
■
■
■