2N4416CSMA 2N4416ACSM SMALL SIGNAL N–CHANNEL J–FET IN A HERMETICALLY SEALED CERAMIC SURFACE MOUNT PACKAGE FOR HIGH RELIABILITY APPLICATIONS MECHANICAL DATA Dimensions in mm (inches) 0.31 rad. (0.012) FEATURES 3 2 • HERMETIC CERAMIC SURFACE MOUNT PACKAGE (SOT23 COMPATIBLE) 0.76 ± 0.15 (0.03 ± 0.006) 2.54 ± 0.13 (0.10 ± 0.005) 0.51 ± 0.10 (0.02 ± 0.004) 1 1.91 ± 0.10 (0.075 ± 0.004) • CECC SCREENING OPTIONS A 0.31 rad. (0.012) 3.05 ± 0.13 (0.12 ± 0.005) A= • SPACE QUALITY LEVEL OPTIONS 1.40 (0.055) max. 1.02 ± 0.10 (0.04 ± 0.004) APPLICATIONS: The 2N4416 and 2N4416A are N-Channel JFETs designed to provide high-performance amplification, especially at high-frequency. SOT23 CERAMIC (LCC1 PACKAGE) Underside View PAD 1 – Source PAD 2 – Drain PAD 3 – Gate ABSOLUTE MAXIMUM RATINGS (Tamb = 25°C unless otherwise stated) VGD VGS IG PD Tj Tstg Semelab plc. Gate – Drain Voltage Gate – Source Voltage Gate Current Power Dissipation Derate Operating Junction Temperature Range Storage Temperature Range Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk 2N4416 –30V –30V 2N4416A –35V –35V 10mA 300mW 1.7mW / °C –55 to 150°C –55 to 150°C DOC 7169 Issue 1 2N4416CSMA 2N4416ACSM ELECTRICAL CHARACTERISTICS (TA= 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit STATIC CHARACTERISTICS V(BR)GSS Gate – Source Breakdown Voltage VDS = 0V 2N4416 –30 –36 IG = –1μA 2N4416A –35 –36 2N4416 –3 –6 V VGSS(off) Gate – Source Cut–off Voltage VDS = 15V ID = 1nA 2N4416A –2.5 –3 –6 IDSS* Saturation Current VDS = 15V VGS = 0V 5 10 15 mA IGSS Gate Reverse Current VGS = –20 VDS = 0V –2 –100 pA Tamb = 125°C –4 –100 nA IG Gate Operating Current VDG = 10V ID = 1mA –20 ID(off) Drain Cut–off Current VDS = 10V VGS = –10V VGS(F) Gate – Source Forward Voltage IG = 1mA VDS = 0V 0.7 V RDS(on) Drain – Source On Resistance VGS = 0V ID = 1mA 150 Ω Transconductance VDS = 15V VGS = 0V Common – Source Output f = 1kHz pA 2 DYNAMIC CHARACTERISTICS gfs gos Common – Source Forward Transconductance Ciss Crss Coss _ en Common – Source Input Capacitance Common – Source Reverse Transfer VDS = 15V Capacitance f = 1MHz VGS = 0V Common – Source Output Capacitance Equivalent Input Noise Voltage VDS = 10V VGS = 0V f = 1kHz 4.5 6 7.5 ms 15 50 μs 2.2 4 0.7 0.8 1 2 6 pF nV √Hz Pulse Test; PW = 300μs, Duty Cycle # 3% Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk DOC 7169 Issue 1