Z-Power LED X10490 Technical Data Sheet XZ20360 Z2 Description Features Z-Power series is designed for high • Super high Flux output and high Luminance current operation and high flux output • Designed for high current operation applications. • Low thermal resistance Z-Power LED's thermal management • SMT solderbility perform exceeds other power LED • Lead Free product solutions. • RoHS compliant It incorporates state of the art SMD design and Thermal emission material. Z Power LED is ideal light sources for general Illumination applications, custom designed solutions, automotive large LCD backlights Applications • Mobile phone flash • Automotive interior / exterior lighting • Automotive signal lighting • Automotive forward lighting • General Torch • Architectural lighting • LCD TV / Monitor Backlight • Projector light source • Traffic signals • Task lighting • Decorative / Pathway lighting • Remote / Solar powered lighting • Household appliances *The appearance and specifications of the product may be changed for improvement without notice. Rev. 00 October. 2009 1 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Full Code of Z-Power LED Series Full code form : X1 X2 X3 X4 X5 X6 X7 – X8 X9 –X10X11 X12 X13X14 1. Part Number - X1 : Color - X2 : New Z-Power LED - ‘Z’ - X3 : New Z-Power LED series number - X4 : LENS type - X5 : Chip quantity (or Power Dissipation) - X6 : Package outline size -X7: Type of PCB 2. Internal Number - X8 - X9 3. Code Labeling - X10 : Luminous flux (or Radiant flux for royal blue) - X11 X12 X13: Dominant wavelength (or x,y coordinates rank code) - X1 4: Forward voltage 4. Sticker Diagram on Reel & Aluminum Vinyl Bag PART NO. : X1 X2 X3 X4 X5 X6 X7 – X8 X9 QUANTITY : ### LOT NUMBER : ########## BIN CODE : X10 X11 X12 X13 X14 For more information about binning and labeling, refer to the Application Note -1 Rev. 00 October. 2009 2 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline Dimension 1. Flat Type [Package Outlines] [Top VIEW] [Bottom VIEW] Cathode Mark Cathode Pad Thermal Pad Anode Pad [Front VIEW] [Recommended] [Solder Pad] Circuit Diagram Anode Cathode Notes : 1. All dimensions are in millimeters. (tolerance : ±0.2 ) 2. Scale : none 3. Thermal pad (slug) is isolated. *The appearance and specifications of the product may be changed for improvement without notice. Rev. 00 October. 2009 3 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 1. Pure White (WZ20360) 1-1 Electro-Optical characteristics at IF=350mA, TA=25ºC Parameter Luminous Flux Symbol [1] Correlated Color Temperature [3] CRI Forward Voltage [4] View Angle Value Unit Min Typ Max ФV [2] 200 260 300 lm CCT - 6300 - K Ra - 68 - - VF 9.5 11.0 12.5 V 2Θ ½ 120 deg. Thermal resistance [5] RθJ-B 6.5 ºC /W Thermal resistance [6] RθJ-C 3.3 ºC /W 1-2 Absolute Maximum Ratings Parameter Symbol Value Unit Forward Current IF 400 mA Power Dissipation Pd 4.5 W Junction Temperature Tj 125 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC - ±10,000V HBM - ESD Sensitivity [7] *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter.(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. --------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink. Rev. 00 October. 2009 4 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 2. Warm White (NZ20360) 2-1 Electro-Optical characteristics at IF=350mA, TA=25ºC Parameter Luminous Flux Symbol [1] Correlated Color Temperature [3] CRI Forward Voltage [4] Value Unit Min Typ Max ФV [2] 177 200 230 lm CCT - 3000 - K Ra - 80 - - VF 9.5 11.0 12.5 V 2Θ ½ 120 deg. Thermal resistance [5] RθJ-B 6.5 ºC /W Thermal resistance [6] RθJ-C 3.3 ºC /W View Angle 2-2 Absolute Maximum Ratings Parameter Symbol Value Unit Forward Current IF 400 mA Power Dissipation Pd 4.5 W Junction Temperature Tj 125 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC - ±10,000V HBM - ESD Sensitivity [7] *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter.(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. --------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink Rev. 00 October. 2009 5 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 3. Natural White (SZ20360) 3-1 Electro-Optical characteristics at IF=350mA, TA=25ºC Parameter Luminous Flux Symbol [1] Correlated Color Temperature [5] CRI Forward Voltage [3] View Angle Value Unit Min Typ Max ФV [2] 177 210 230 lm CCT - 4000 - K Ra - 80 - - VF 9.5 11.0 12.5 V 2Θ ½ 120 deg. Thermal resistance [5] RθJ-B 6.5 ºC /W Thermal resistance [6] RθJ-C 3.3 ºC /W 3-2 Absolute Maximum Ratings Parameter Symbol Value Unit Forward Current IF 400 mA Power Dissipation Pd 4.5 W Junction Temperature Tj 125 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC - ±10,000V HBM - ESD Sensitivity [7] *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter.(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. --------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink Rev. 00 October. 2009 6 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 1. Pure White 1.0 Standard eye response curve Relative Spectral Power Distribution 0.8 0.6 0.4 0.2 0.0 300 400 500 600 700 800 700 800 Wavelength (nm) 2. Warm White 1.0 0.8 Relative Spectral Power Distribution Z-Power LED X10490 Technical Data Sheet Color Spectrum, TA=25ºC 0.6 0.4 0.2 0.0 300 400 500 600 Wavelength (nm) Rev. 00 October. 2009 7 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 1.0 0.8 Relative Spectral Power Distribution Z-Power LED X10490 Technical Data Sheet 3. Natural White 0.6 0.4 0.2 0.0 300 400 500 600 700 800 Wavelength (nm) Rev. 00 October. 2009 8 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 1. Relative Light Output vs. Junction Temperature at IF=350mA Relative Light Output [%] 160 Pure White Warm White & Natural White 140 120 100 80 60 40 20 0 25 50 75 100 125 o Junction Temperature, TJ [ C] 2. Forward Voltage Shift vs. Junction Temperature at IF=350mA Pure White & Warm white & Natural White 0.0 Forwrd Voltage(Vf) Z-Power LED X10490 Technical Data Sheet Junction Temperature Characteristics -0.2 -0.4 -0.6 -0.8 -1.0 25 50 75 100 125 o Junction Temperature, TJ [ C] Rev. 00 October. 2009 9 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 1. Forward Voltage vs. Forward Current , TA=25 ºc Average Forward Current [mA] 700 Pure White & Warm White & Natural White 600 500 400 300 200 100 0 0 2 4 6 8 10 12 Forward Voltage [V] 2. Forward Current vs. Normalized Relative Luminous Flux, TA=25 ºc 1.5 Relative Lumious Flux(a.U) Z-Power LED X10490 Technical Data Sheet Forward Current Characteristics Pure White & Warm White & Natural White 1.0 0.5 0.0 0 100 200 300 Forward Current [mA] 400 Rev. 00 October. 2009 10 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 1-1. Pure White, Warm White, Natural White (T = 125 ºC, @350mA) JMAX 400 350 300 Current [mA] Z-Power LED X10490 Technical Data Sheet Ambient Temperature vs Allowable Forward Current 250 o RjaT = 15 C/W 200 o RjaT = 10 C/W 150 100 50 0 0 25 50 75 100 125 150 o Ambient Temperature [ C] Rev. 00 October. 2009 11 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 1. Pure White, Warm White, Natura White 0 1.0 30 0.8 Relative luminous flux Z-Power LED X10490 Technical Data Sheet Typical Dome Type Radiation pattern 0.6 60 0.4 0.2 0.0 -80 -60 -40 -20 0 90 Angle(deg.) Rev. 00 October. 2009 12 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Tm : Reflow machine setting temp (max 30 sec.) Ts : Surface temp of PCB (max) Ts : Surface temp of PCB (recommend) Ts : Surface temp of PCB (min) 260 240 220 200 180 ~ Z-Power LED X10490 Technical Data Sheet 3. Reflow Soldering Conditions / Profile Pre-heating Cooling -5 °C/sec Rising 5 °C/sec 150 0 Time [Hr] 4. Hand Soldering conditions Lead : Not more than 3 seconds @MAX280℃ Slug : Use a thermal-adhesives * Caution 1. Reflow soldering should not be done more than one time. 2. Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, suitable tools have to be used. 3. Die slug is to be soldered. 4. When soldering, do not put stress on the LEDs during heating. 5. After soldering, do not warp the circuit board. 6. Recommend to use a convection type reflow machine with 7 ~ 8 zones. Rev. 00 October. 2009 13 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Emitter Type Reel Packaging Note : 1. The number of loaded products in the reel is 500ea 2. All dimensions are in millimeters (tolerance : ±0.2 ) 3. Scale none *The appearance and specifications of the product may be changed for improvement without notice. Rev. 00 October. 2009 14 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Packaging Structure Aluminum Vinyl Bag PART NO. : ######-## QUANTITY : *** LOT NUMBER : #######-####### BIN CODE : ####### Outer Box TYPE c SIZE(mm) a c b 350 350 370 ZLED PART : XZ20360-** PO CODE : ## Q'YT : ###### LOT NO : YMDD-##### DATE : ###### ZLED b SEOUL SEMICONDUCTOR CO.,LTD a Note : 1. 6~10 reels are loaded in box 2. Scale none 3. For more information about binning and labeling, refer to the Application Note - 1 Rev. 00 October. 2009 15 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet precaution for use • Storage To avoid the moisture penetration, we recommend storing Z Power LEDs in a dry box (or desiccator) with a desiccant . The recommended storage conditions are Temperature 5 to 30 degrees Centigrade. Humidity 50% maximum. • Precaution after opening packaging However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40℃ Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, components should be dried for 10-12hr at 60±5℃ • Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. • Please avoid rapid cooling after soldering. • Components should not be mounted on warped direction of PCB. • Anti radioactive ray design is not considered for the products listed here in. • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. • When the LEDs are illuminating, operating current should be decided after considering the package maximum temperature. • LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. • The appearance and specifications of the product may be modified for improvement without notice. • Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. • The slug is connected to the anode. Therefore, we recommend to isolate the heat sink. • Attaching LEDs, don’t use adhesives to generate organic vapor. Rev. 00 October. 2009 16 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Handling of Silicone Resin LEDs (1) During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound. (2) In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched. (3) When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented. This is assured by choosing a pick and place nozzle which is larger than the LED’s reflector area. (4) Silicone differs from materials conventionally used for the manufacturing of LEDs. These conditions must be considered during the handling of such devices. Compared to standard encapsulants, silicone is generally softer, and the surface is more likely to attract dust. As mentioned previously, the increased sensitivity to dust requires special care during processing. In cases where a minimal level of dirt and dust particles cannot be guaranteed, a suitable cleaning solution must be applied to the surface after the soldering of components. (5) SSC suggests using isopropyl alcohol for cleaning. In case other solvents are used, it must be assured that these solvents do not dissolve the package or resin. Ultrasonic cleaning is not recommended. Ultrasonic cleaning may cause damage to the Rev. 00 LED. October. 2009 17 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)