SSC GBL08

GBL02
Glass Passivated Single-Phase Bridge Rectifiers
PRODUCT SUMMARY
Reverse Voltage 50 to 1000 Volts
Forward Current 4.0 Amperes
FEATURES
Ideal for printed circuit boards
High surge current capability
Typical IR less than 0.1µA
High case dielectric strength
Solder Dip 260 oC, 40 seconds
MECHANICAL DATA
Case: GBL
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated (E3 Suffix) leads, solderable per
J-STD-002B and JESD22-B102D
Polarity: As marked on body
TYPICAL APPLICATIONS
Package outline dimensions in inches (millimeters)
General purpose use in ac-to-dc bridge full wave rectification for
Monitor, TV, Printer, SMPS, Adapter, Audio equipment, and Home
Appliances application
Pb-free; RoHS-compliant
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25oC ambient temperature unless otherwise specified.
Parameter
Symbols
GBL005
GBL01
GBL02
GBL04
GBL06
GBL08
GBL10
Units
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum average forward rectified output
current at
TC=50oC
TA=40oC
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing (t < 8.3ms)
Maximum instantaneous forward voltage drop per leg at 2.0A
Maximum DC reverse current
at rated DC blocking voltage per leg
TA=25oC
TA=150oC
Typical junction capacitance per leg at 4.0V, 1MHz
Typical thermal resistance per leg
Operating junction and storage temperature range
IF(AV)
4.0 (1)
3.0 (2)
Amps
IFSM
150.0
Amps
I2t
93
A 2 se c
VF
1.0
Volts
IR
10.0
500
uA
CJ
95
40
RθJA
RθJL
22 (2)
3.5 (1)
TJ, TSTG
-55 to +150
pF
o
C/W
o
C
Notes: 1. Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Al. plate
2. Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length and 0.5 x 0.5" (13 x13 mm) copper pads
02/08/2007 Rev.1.00
www.SiliconStandard.com
1
GBL02
RATINGS AND CHARACTERISTIC CURVES
o
( TA = 25 C unless otherwise noted )
Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no
guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no
responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its
use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including
without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to
the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of
Silicon Standard Corporation or any third parties.
02/08/2007 Rev.1.00
www.SiliconStandard.com
2