MUR805 THRU MUR860 GLASS PASSIVATED SUPER FAST RECTIFIERS PRODUCT SUMMARY Reverse Voltage 50 to 600 Volts Foward Current 8.0 Amperes FEATURES TO-220AC Glass passivated chip Superfast switching time for hight efficiency Low reverse leakage current High surge capacity MECHANICAL DATA Case: TO-220AC full molded plastic package Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: As marked Standard packaging: Any Weight: 0.08 ounces, 2.24 grams Pb-free; RoHS-compliant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o (Ratings at 25 C ambient temperature unless otherwise specified.) Parameter Symbol MUR805 MUR810 MUR820 MUR840 MUR860 Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 Volts Maximum RMS voltage VRMS 35 70 140 280 420 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 Volts Maximum average forward rectified current at TC=100oC IF(AV) 8.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125.0 Amps Maximum instantaneous forward voltage at 8.0A VF Maximum DC reverse current at rated DC blocking voltage @TJ=25oC @TJ=125oC Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Operating junction and storage temperature range 1.0 1.3 1.8 Volts IR 10.0 500 uA trr 50 nS TJ, TSTG -55 to +150 o C Notes: 1. Pulse test: Pulse width 300 usec, Duty ccle 2% 03/07/2007 Rev.1.00 www.SiliconStandard.com 1 MUR805 THRU MUR860 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 03/07/2007 Rev.1.00 www.SiliconStandard.com 2