SSC MUR860CT

MUR805CT THRU MUR860CT
GLASS PASSIVATED SUPER
FAST RECTIFIERS
PRODUCT SUMMARY
Reverse Voltage 50 to 600 Volts
Foward Current 8.0 Amperes
FEATURES
TO-220AB
Superfast switching time for hight efficiency
Low reverse leakage current
High surge capacity
MECHANICAL DATA
Case: TO-220AB full molded plastic package
Terminals: Lead solderable per MIL-STD-202, Method 208
Polarity: As marked
Standard packaging: Any
Weight: 0.08 ounces, 2.24 grams
Pb-free; RoHS-compliant
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
(Ratings at 25 C ambient temperature unless otherwise specified.)
Parameter
Symbol
MUR805CT
MUR810CT
MUR820CT
MUR840CT
MUR860CT
Unit
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
Volts
Maximum RMS voltage
VRMS
35
70
140
280
420
Volts
Maximum DC blocking voltage
V DC
50
100
200
400
600
Volts
o
Maximum average forward rectified current at TC=120 C
IF(AV)
8.0
Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
100.0
Amps
Maximum instantaneous forward voltage at 4.0A per
element
VF
Maximum DC reverse current
at rated DC blocking voltage
@TJ=25oC
@TJ=100oC
trr
Operating junction and storage temperature range
2.8
10.0
800
IR
Maximum reverse recovery time at
IF=0.5A, IR=1.0A, Irr=0.25A
Notes:
2.2
30
TJ, TSTG
uA
50
-55 to +150
Volts
nS
o
C
1. Pulse test: Pulse width 300 usec, Duty cycle 2%
03/07/2007 Rev.1.00
www.SiliconStandard.com
1
MUR805CT THRU MUR860CT
RATINGS AND CHARACTERISTIC CURVES
(TA = 25oC unless otherwise noted)
Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no
guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no
responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its
use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including
without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to
the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of
Silicon Standard Corporation or any third parties.
03/07/2007 Rev.1.00
www.SiliconStandard.com
2