SSC MBR1060CT

MBR1030CT-MBR1060CT
Schottky Barrier Recitifier
PRODUCT SUMMARY
TO-220
TO-220 Plastic-Encapsulate Transistors
1. ANODE
FEATURES
2. CATHODE
Scottky Barrier Chip
Guard Ring Die Construction for Transient Protection
Low Power Loss, High Efficiency
Very low forward voltage drop
High Surge Capability
High Current Capability and Low Forward Voltage Drop
For use in low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
3. ANODE
123
1
Pb-free; RoHS-compliant
2
ELECTRICAL CHARACTERISTICS
3
( Tamb = 25oC unless otherwise specified )
Characteristic
Symbol
Peak Repetitive Reverse Voltage
VRRM
Working Peak Reverse Voltage
VRWM
DC Blocking Voltage
VR
PMS Reverse Voltage
VR(RMS)
Average Rectified Output Current
@ TC=105℃
(Note 1)
MBR
MBR
MBR
MBR
MBR
MBR
1030CT 1035CT 1040CT 1045CT 1050CT 1060CT
Unit
30
35
40
45
50
60
V
21
24.5
28
31.5
35
42
V
IO
10
A
IFSM
125
A
IRRM
1.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load
(JEDEC Method)
Repetitive Peak Reverse Surge Current
@ t≤ 2.0µs
Forward Voltage Drop
@ IF=5.0A, TC=125℃
@ IF=5.0A, TC= 25℃
VFM
@ TC= 25℃
at Rated DC Blocking Voltage
@ TC=125℃
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range
0.70
0.70
0.80
0.84
@ IF=10A, TC= 25℃
Peak Reverse Current
0.57
IRM
V
0.95
0.1
15
mA
Cj
150
pF
Tj, TSTG
-65 to +150
℃
Notes: 1. Thermal resistance junction to case mounted heat sink.
2. Measured at 1.OMHz and applied reverse voltage of 4.0V DC.
01/29/2007 Rev.1.00
www.SiliconStandard.com
1
MBR1030CT-MBR1060CT
Schottky Barrier Recitifier
Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no
guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no
responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its
use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including
without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to
the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of
Silicon Standard Corporation or any third parties.
01/29/2007 Rev.1.00
www.SiliconStandard.com
2