SPD10192 Thru Solid State Devices, Inc. SPD10198 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 35 Amp FAST RECOVERY RECTIFIER Part Number/Ordering Information 1/ SPD10 __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV Level │ │ S = S Level │ │ │ └ Pin Configuration __ = Normal (Cathode to Stud) │ (See Table 1) R = Reverse (Anode to Stud) │ └ Family/Voltage 192 = 800V 194 = 1000V 195 = 1100V 196 = 1200V 197 = 1300V 198 = 1400V 800 - 1400 Volt 250 nsec Features: • • • • • • • • • • Fast Recovery: 250 nsec maximum PIV to 1400V Low Reverse Leakage Current Hermetically Sealed Single Chip Construction High Surge Rating Low Thermal Resistance Ultra Fast and Hyper Fast Recovery Versions Available* For Reverse Polarity Add Suffix “R” TX, TXV, and S-Level Screening Available 2/ *Contact Factory Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C) Operating & Storage Temperature Maximum Total Thermal Resistance Junction to Case SPD10192 SPD10194 SPD10195 SPD10196 SPD10197 SPD10198 Symbol Value Units VRRM VRWM VR 800 1000 1100 1200 1300 1400 Volts Io 35 Amps IFSM 500 Amps T OP & TSTG -65 to +150 ºC RθJC 1.0 ºC/W DO-5: Notes: 1/ For ordering information, price, operating curves, and availability- contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0132A DOC SPD10192 Thru Solid State Devices, Inc. SPD10198 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Symbol Max Units Instantaneous Forward Voltage Drop (IF = 35 Adc, TA = 25 ºC, 300μs pulse) VF 1.4 VDC Instantaneous Forward Voltage Drop (IF = 35 Adc, TA = -55 ºC, 300μs pulse) VF 1.6 VDC Reverse Leakage Current (Rated VR, TA = 25 ºC, 300μs pulse minimum) IR 20 μA Reverse Leakage Current (Rated VR, TA = 100 ºC, 300μs pulse minimum) IR 2 mA Reverse Recovery Time (IF = 500 mA, IR = 1 Amp, IRR = 250 mA, TA = 25 ºC) tRR 250 nsec Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) CJ 250 pF Table 1- PIN ASSIGNMENT Code Configuration Terminal Stud __ Normal Anode Cathode R Reverse Cathode Anode DO-5 Outline (Normal Pin Configuration Shown): NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0132A DOC