SPD4963-1 thru SPD4963-3 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1 AMP 550 – 800 VOLTS 130 nsec FAST RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD4963 _____ _____ │ │ │ │ │ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Reverse Voltage -1 = 550V -2 = 670V -3 = 800V └ • • • • • • • • MAXIMUM RATINGS DC Blocking Voltage Peak Repetitive Reverse Voltage FEATURES: Fast Recovery: 130 nsec maximum PIV up to 800 Volts Low Reverse Leakage Current Hermetically Sealed Single Chip Construction High Surge Rating Low Thermal Resistance TX, TXV, and Space Level Screening Available2/ Symbol SPD4963-1 SPD4963-2 SPD4963-3 SPD4963-1 SPD4963-2 SPD4963-3 Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA=25oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO; Allow junction to reach equilibrium between pulses; TA=25oC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Lead, L = 0.375” Value 500 600 600 550 670 800 VR VBR Volts Volts IO 1 Amps IFSM 20 Amps TOP & Tstg -65 to +175 RθJL 40 NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flow Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Units DATA SHEET #: RC0051C o C o C/W Axial DOC Solid State Devices, Inc. SPD4963-1 thru SPD4963-3 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Symbol Min Max Unit SPD4963-1 SPD4963-2 SPD4963-3 VF1 –– –– –– 1.30 1.30 1.35 Volts ALL VF2 –– 10.0 Volts Reverse Breakdown Voltage (IR = 100 μADC, TA = 25°C, 300μsec min Pulse) SPD4963-1 SPD4963-2 SPD4963-3 VBR 550 670 800 –– –– –– Volts Reverse Leakage Current (Rated VR, 300μsec min Pulse) TA = 25oC TA = 150oC IR1 IR2 –– –– 2 1 μA mA Storage Charge (IF = 100 mA, TA = 25oC) QS –– 30 nC Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA, TA = 25oC) trr –– 130 ns Instantaneous Forward Voltage Drop (IF = 1 ADC, TA = 25°C, 300 - 500μsec Pulse) Instantaneous Forward Voltage Drop (IF = 60 ADC, TA = 25°C, 50 - 500μsec Pulse) Case Outline: DIM MIN MAX A B C D --0.027” 1.00” 0.120” 0.250” 0.033” –– NOTES: Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0051C DOC