Rev. A DTSPU45 Series Up to 50 Watts Single, Dual, & Triple Outputs AC/DC Desktop Power Supply FEATURES ● Splash Proof ● Class I Insulation ● Two Year Warranty ● IEC-320-C14 Input Inlet ● Optional Output Connectors ● Single, Dual, and Triple Outputs ● Over Voltage Protection (Crowbar Design) ● Wide Input Voltage 90 to 264VAC, 47~63Hz ● Output Voltage Available from 2VDC to 50VDC ● Input Surge Current, Over Voltage, and Over Load Protection SPECIFICATIONS: DTSPU45 Series o All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT (Vin) Input Voltage Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current Start-Up Time OUTPUT (Vo) Output Voltage Range Load Regulation Line Regulation Output Power Range Output Current Range *Ripple & Noise (peak to peak) Transient Response Hold-Up Time PROTECTION Over Voltage Protection Over Current Protection GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage For Primary to Ground Isolation Resistance ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity Temperature Coefficient PHYSICAL Weight Dimensions Warranty SAFETY EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 TEST CONDITIONS Min Nom Max Unit 12 26 0.5 1 264 63 1.35 0.8 15 30 0.75 2 VAC Hz A A A A mA s 90 47 Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC 0.3 See Rating Chart 3 15 0.5 1 0 50 See Rating Chart 0.5 1 4 16 112 110 Io = Full Load, Vin = 230VAC 75 83 VDC % % W A % ms ms 132 150 % % 88 % Primary to Secondary 4242 VDC Primary to Ground 2121 VDC 50 MΩ Test Voltage = 500VDC Derate linearly from 100% Load at 40°C to 50% load at 70°C All Outputs 0 -40 5 -0.04 70 85 95 +0.04 Approximately 535 ~ 560 5.75(L) x 2.99(W) x 1.69(H) 2 Vin = 220VAC Vin = 110VAC *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 B B °C °C % %/°C grams inches years Class Class DTSPU45 Series Up to 50 Watts Single, Dual, & Triple Outputs AC/DC Desktop Power Supply Rev. A OUTPUT VOLTAGE / CURRENT RATING CHARTS SINGLE OUTPUT MODELS Model Number DTSPU45-100 DTSPU45-101 *DTSPU45-102 *DTSPU45-103 *DTSPU45-104 *DTSPU45-105 *DTSPU45-106 DTSPU45-107 DTSPU45-108 DTSPU45-109 DTSPU45-110 DTSPU45-111 Preset Voltage 3 VDC 5 VDC 6 VDC 8 VDC 11 VDC 13 VDC 16 VDC 21 VDC 27 VDC 33 VDC 40 VDC 50 VDC Output Voltage Range 2 ~ 3 VDC 3 ~ 5 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 50 VDC Model Number Output 1 *DTSPU45-200 Output 2 Output 1 *DTSPU45-201 Output 2 Output 1 *DTSPU45-202 Output 2 Output 1 DTSPU45-203 Output 2 Output 1 DTSPU45-204 Output 2 Output 1 *DTSPU45-209 Output 3 Output 1 *DTSPU45-210 Output 3 Output 1 DTSPU45-215 Output 3 Output 1 DTSPU45-216 Output 3 Output Voltage +3.3 VDC +12.0 VDC +5.0 VDC +12.0 VDC +5.0 VDC +15.0 VDC +5.0 VDC +24.0 VDC +3.3 VDC +5.0 VDC +12 VDC -12 VDC +15.0 VDC -15.0 VDC +5.0 VDC -24.0 VDC +5.1 VDC +7.2 VDC Min. Output Current 0.5A 0.3A 0.5A 0.3A 0.8A 0.3A 0.5A 0.1A 0.5A 0.2A 0.3A 0.1A 0.2A 0.1A 0.5A 0.1A 0A 0.2A Model Number Output 1 *DTSPU45-300 Output 2 Output 3 Output 1 *DTSPU45-301 Output 2 Output 3 Output 1 *DTSPU45-302 Output 2 Output 3 Output 1 *DTSPU45-303 Output 2 Output 3 Output 1 DTSPU45-304 Output 2 Output 3 Output 1 DTSPU45-305 Output 2 Output 3 Output 1 *DTSPU45-306 Output 2 Output 3 Output Voltage +3.3 VDC +12.0 VDC -12.0 VDC +5.0 VDC +12.0 VDC -5.0 VDC +5.0 VDC +12.0 VDC -12.0 VDC +5.0 VDC +15.0 VDC -15.0 VDC +5.0 VDC +24.0 VDC -24.0 VDC +5.0 VDC +24.0 VDC -12.0 VDC +3.3 VDC +12.0 VDC -5.0 VDC Min. Output Current 1.0A 0.3A 0.1A 0.5A 0.2A 0A 0.5A 0.2A 0A 0.5A 0.3A 0A 0.5A 0.2A 0A 0.5A 0.1A 0A 0.5A 0.4A 0A Max. Output Current 8.00A max. 8.00A max. 8.00 ~ 6.66A 7.00 ~ 5.25A 5.63 ~ 4.00A 4.00 ~ 3.46A 3.46 ~ 2.81A 3.12 ~ 2.38A 2.30 ~ 1.85A 1.85A ~ 1.51A 1.51 ~ 1.25A 1.25 ~ 1.00A Total Regulation 7% 5% 5% 5% 4% 3% 3% 3% 2% 2% 2% 2% Max. Output Power 24W 40W 40W 42W 45W 45W 45W 50W 50W 50W 50W 50W Max. Regulation 7% 5% 5% 5% 7% 5% 5% 5% 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% Max. Output Power Max. Regulation 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 6% 5% 5% 5% 5% 5% 5% 5% 7% 5% 5% Max. Output Power DUAL OUTPUT MODELS Max. Output Current 5A 2A 5A 2A 5A 1.5A 5A 1A 5A 2A 3A 1A 2A 1A 5A 1A 1A 2.6A 40W 42W 42W 42W 26.5W 42W 42W 42W 23.82W TRIPLE OUTPUT MODELS Max. Output Current 5A 2A 0.8A 5A 2A 0.8A 5A 2A 0.8A 5A 2A 0.8A 5A 1A 0.5A 5A 1A 0.8A 5A 2A 0.8A Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 42W 42W 42W 42W 42W 42W 42W Rev. A DTSPU45 Series Up to 50 Watts Single, Dual, & Triple Outputs AC/DC Desktop Power Supply NOTES 1. For single output models the output voltage is specified as a range (Ex: 40 ~ 50VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 2. The “ * ” symbol means PSE approval. 3. Models with output voltages under 15VDC have been approved by TUV/PSE. 4. Optional output connectors are available (see “DC Output Plug Selector List” link located at the bottom of the “Desktop” category page). Please call factory for ordering details. DERATING CURVE MECHANICAL DRAWINGS Unit: inches [mm] Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797