DTSPU60 Series Rev A 60 Watt Single Output AC/DC Desktop Power Supply FEATURES ● Splash Proof ● 2 Year Warranty ● Class I Insulation ● IEC-320-C14 Input Inlet ● Optional Output Connector ● Wide Input Voltage 90 to 264VAC, 47~63Hz ● Output Voltage Protection (Crowbar Design) ● Output Voltage Available from 3VDC thru 50VDC SPECIFICATIONS: DTSPU60 Series All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max INPUT (Vin) Operating Voltage Range Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current Start-Up Time OUTPUT (Vo) Output Voltage Range Load Regulation Line Regulation Output Power Output Current Range *Ripple & Noise (peak to peak) Transient Response Hold-Up Time PROTECTION Over Voltage Protection Over Current Protection GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage For Primary to Ground Isolation Resistance ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity Temperature Coefficient PHYSICAL Weight Dimensions Warranty SAFETY EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 90 47 Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC 0.3 12 26 0.5 1 264 63 1.6 1.0 15 30 0.75 2 See Rating Chart 3 7 0.5 1 0 60 See Rating Chart 0.5 1 4 16 Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC 112 110 Io = Full Load, Vin = 230VAC 70 132 150 83 88 Unit VAC Hz A A A A mA s VDC % % W A % ms ms % % % Primary to Secondary 4242 VDC Primary to Ground 2121 VDC 50 MΩ Test Voltage = 500VDC Derate linearly from 100% Load at 40°C to 50% load at 70°C All Outputs 0 -40 5 -0.04 +70 +85 95 +0.04 Approximately 340 4.65 x 2.05 x 1.36 2 Vin = 220VAC Vin = 110VAC *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 B B °C °C % %/°C grams inches years Class Class DTSPU60 Series 60 Watt Single Output AC/DC Desktop Power Supply Rev A OUTPUT VOLTAGE / CURRENT RATING CHART Preset Voltage Output Voltage Range Output Current Total Regulation Maximum Output Power DTSPU60-101 3 VDC 3 ~ 5 VDC 6.60 ~ 4.00 A 7% 20W DTSPU60-102 5 VDC 5 ~ 6 VDC 6.00 ~ 5.00 A 5% 30W DTSPU60-103 6 VDC 6 ~ 8 VDC 5.83 ~ 4.37 A 5% 35W DTSPU60-104 8 VDC 8 ~ 11 VDC 5.00 ~ 3.63 A 5% 40W DTSPU60-105 11 VDC 11 ~ 13 VDC 4.54 ~ 3.84 A 5% 50W DTSPU60-105-1 12 VDC 11 ~ 13 VDC 5.45 ~ 4.61 5% 60W *DTSPU60-106 13 VDC 13 ~ 16 VDC 4.23 ~ 3.43 A 5% 55W *DTSPU60-107 16 VDC 16 ~ 21 VDC 3.75 ~ 2.85 A 5% 60W *DTSPU60-108 21 VDC 21 ~ 27 VDC 2.85 ~ 2.22 A 5% 60W *DTSPU60-109 27 VDC 27 ~ 33 VDC 2.22 ~ 1.81 A 5% 60W *DTSPU60-110 33 VDC 33 ~ 40 VDC 1.81 ~ 1.50 A 3% 60W *DTSPU60-111 40 VDC 40 ~ 50 VDC 1.50 ~ 1.20 A 3% 60W Model Number NOTES 1. The asterisk “ * ” next to the model number indicates PSE approval. 2. The output voltage is specified as a range (Ex: 40 ~ 50VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 3. Models with output voltages from 15VDC ~ 30VDC have been approved by TUV/PSE. Models with output voltages from 30VDC ~ 50VDC have been approved by JET/PSE. 4. Optional output connectors are available (see “DC Output Plug Selector List” link located at the bottom of the “Desktop” category page). Please call factory for ordering details. DERATING CURVE Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTSPU60 Series Rev A 60 Watt Single Output AC/DC Desktop Power Supply MECHANICAL DRAWING Unit: inches [mm] NOTES 1. Dimensions are shown in inches [mm] 2. Weight: Approximately 265 ~ 280 grams. 3. Optional output connectors available: (“DC Output Plug Selector List”) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797