DTIPU20 Series 20 Watt Single Output AC/DC Desktop Power Supply Rev A FEATURES ● Splash Proof ● Single Output ● 3 Year Warranty ● A Type: Class I Insulation ● B Type: Class II Insulation ● CEC and Energy Star Compliance ● 2 Types of Inlet Connectors Available ● Optional Output Connectors Available ● Approved as Limited Power Source (LPS) ● Wide Input Voltage 90~264VAC, 47~63Hz ● -20°C~+70°C Operating Temperature Range Type A Type B DESCRIPTION The DTIPU20 Series of AC/DC switching mode single output power supplies provides 20 watts of continuous output power. All models have a single output, universal input voltage range, and an operating temperature range of -20°C ~ +70°C. This series also has two types of AC inlet connectors to choose from: Type A (IEC-320-C6) or Type B (IEC-320-C8). All supplies are UL 94V-1 compliant. All models meet FCC Part-15 class B and CISPR-22 class B emission limits and are designed to comply with UL/cUL (UL 60950-1), TUV/GS (EN 60950-1) and new CE requirements. All units are CEC and Energy Star compliant and are 100% burn-in tested. SPECIFICATIONS: DTIPU20 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit 12 26 0.5 0.15 0.25 264 63 0.4 0.25 15 30 0.75 0.25 0.5 VAC Hz A A A A mA mA s INPUT (Vin) Operating Voltage Range Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current (A Type) Safety Ground Leakage Current (B Type) Start-Up Time 90 47 Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC OUTPUT (Vo) Output Voltage Range Load Regulation Line Regulation Output Power Range Output Current Range Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC 1 0 12 See Rating Chart 3 5 0.5 1 20 See Rating Chart 0.5 1 4 14 16 % % W % ms ms PROTECTION Over Voltage Protection Over Current Protection Nil 110 150 % % GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage For Primary to Ground (A Type Only) Isolation Resistance No Load Power Consumption Io = Full Load, Vin = 230VAC 75 85 95 % Primary to Secondary 4242 VDC Primary to Ground 2121 VDC Test Voltage = 500VDC No Load, Vin = 240VAC 50 0 0.4 0.5 MΩ W ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity Temperature Coefficient MTBF Derate linearly from 100% Load at 40°C to 50% load at 70°C All Outputs Operating temperature at 25°C, Calculated per MIL-HDBK-217F -20 -40 5 -0.04 70 85 95 +0.04 300,000 hours °C °C % %/°C PHYSICAL Weight Dimensions (L x W x H) Input Inlet Warranty Approximately 170 grams 3.90 x 1.65 x 1.22 inches A Type: IEC-320-C6, B Type: IEC-320-C8 3 years SAFETY CISPR (EMI Requirements for CISPR-22) FCC (EMI Requirements for FCC Part-15) Vin = 220VAC Vin = 110VAC Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 B B Class Class DTIPU20 Series 20 Watt Single Output AC/DC Desktop Power Supply Rev A MODEL SELECTION CHART \ Model Number Preset Voltage *DTIPU20A-102 *DTIPU20A-105 *DTIPU20A-106 *DTIPU20A-108 *DTIPU20A-109 DTIPU20A-111 *DTIPU20B-102 *DTIPU20B-105 *DTIPU20B-106 *DTIPU20B-108 *DTIPU20B-109 DTIPU20B-111 6 VDC 13 VDC 16 VDC 27 VDC 33 VDC 48 VDC 6 VDC 13 VDC 16 VDC 27 VDC 33 VDC 48 VDC Output Voltage Range 5 ~ 6 VDC 11 ~ 13 VDC 13 ~ 16 VDC 21 ~ 27 VDC 27 ~ 33 VDC 40 ~ 48 VDC 5 ~ 6 VDC 11 ~ 13 VDC 13 ~ 16 VDC 21 ~ 27 VDC 27 ~ 33 VDC 40 ~ 48 VDC Output Current Total Regulation Max Output Power 3.00 ~ 2.50A 1.81 ~ 1.53A 1.53 ~ 1.25A 0.95 ~ 0.74A 0.74 ~ 0.60A 0.50 ~ 0.41A 3.00 ~ 2.50A 1.81 ~ 1.53A 1.53 ~ 1.25A 0.95 ~ 0.74A 0.74 ~ 0.60A 0.50 ~ 0.41A 5% 4% 4% 3% 3% 3% 5% 4% 4% 3% 3% 3% 15W 20W 20W 20W 20W 20W 15W 20W 20W 20W 20W 20W AC Inlet Connector IEC-320-C6 IEC-320-C8 NOTES 1. The DTIPU20 Series is designated as DTIPU20x-y where x represents the type of AC input inlet connector which can either be A (IEC-320-C6) or B (IEC-320-C8); y can be 102, 103, 104, 105, 106, 107, 108, 109, 110 or 111 for output voltage. 2. The output voltage is specified as a range (Ex: 40 ~ 48VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 3. To meet the total regulation specifications all models must use an AWG#18/4FT output cable. The regulation will change if the output cable is modified. 4. The “*” represents TUV/PSE approval. Models with output voltages under 30VDC have been approved by TUV/PSE. 5. Optional output connectors are available. Please call factory for ordering details. MECHANICAL DRAWINGS Unit: inches [mm] Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797