DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 CUSTOMER APPROVAL 1.POLARIZER OPTIONS: □R=REFLECTIVE □F=TRANSFLECTIVE □N=TRANSMISSIVE NEGATIVE □M=TRANSMISSIVE POSITIVE 2.BACKLIGHT OPTIONS:□N=NONE □E=EL □L=LED □C=CCFL 3. BACKLIGHT COLOR: □A= AMBER □B= BLUE □G= GREEN □W=WHITE □R= RED □RGB= RED+GREEN+BLUE 4.FLUID OPTIONS: □T=TN □F=FSTN □Y=STN-YELLOW GREEN □G=STN-GRAY □B=STN-BLUE 5. VIEWING DIRECTION: □B=BOTTOM VIEW(6 O’CLOCK) □T=TOP VIEW(12 O’CLOCK) 6.TEMPERATURE RANGE: □ S=STANDARD TEMPERATURE RANGE □H=DUAL POWER,WIDE TEMPERATURE RANGE □W=SINGLE POWER,WIDE TEMPERATURE RANGE 7.OTHERS REQUIREMENT: ※ PART NO. : APPROVAL AQM1364A-MLB-FTW COMPANY CHOP CUSTOMER COMMENTS DISPLAYTRONIC ENGINEERING APPROVAL DESIGN BY CHECKED BY APPROVED BY AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 REVISION RECORD REVISION VER1.0 REVISION DATE 16/11-2007 PAGE CONTENTS FIRST ISSUED DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 1 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 ※ CONTENTS 1.0 MECHANICAL SPECS 2.0 ABSOLUTE MAXIMUM RATINGS 3.0 ELECTRICAL CHARACTERISTICS 4.0 OPTICAL CHARACTERISTICS (TA=25ºC, VDD= 5.0V±0.25V, STN LC FLUID) 5.0 BLOCK DIAGRAM 6.0 PIN ASSIGNMENT 7.0 APPLICATION CIRCUIT 8.0 TIMING CHARACTERISTICS 9.0 RESET TIMING CHARACTERISTICS 10.0 POWER ON/OFF SEQGUENCE 11.0 MECHANICAL DIAGRAM 12.0 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS 13.0 RELIABILITY TEST 14.0 DISPLAY INSTRUCTION TABLE DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 2 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 1.0 MECHANICAL SPECS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Part NO Outline Dimensions Viewing Area Active Area DISP.Construction Number of Dots Dot Size Dot Pitch Driving Method ASSY.Type Controller IC Display Type Polarizer Options Viewing direction Backlight Options Temperature Range Options AQM1364A-MLB-FTW 82.0mm(W) x 37.0mm(H) x max 28.0mm(D) 79.0 mm(W) x 25.5mm(H) 58.984 mm(W) x 20.972mm(H) 132x64Dots 132x64 0.427mm(W) x 0.308mm(H) 0.447mm(W) x 0.328mm(H) 1/65 duty,1/9 bias COG SPLC501C FSTN,Positive Transmissive 12o’clock Blue backlight or not Wide(-10ºC ~ 60ºC) 2.0 ABSOLUTE MAXIMUM RATINGS Item Symbol Min Typ Max Unit Operating temperature (Wide temperature) TOPR -10 - 60 ºC Storage temperature (Wide temperature) TSTG -20 - 70 ºC VIN -0.3 - Vdd+0.3 V VDD-VSS -0.3 - 7.0 V V5 -12.0 - 0.3 V Input voltage(Ta=25 ºC) Supply voltage for logic(Ta=25 ºC) Supply voltage for LCD drive(Ta=25 ºC) 3.0 ELECTRICAL CHARACTERISTICS Item Symbol Condition Min Typ Max Unit VDD-VSS Ta=25 ºC - 5.0 - V VDD-V5 Ta=25 ºC 8.85 9.0 9.15 V Input voltage “H” level VIH - 0.8VDD - VDD V Input voltage “L” level VIL - VSS - 0.2VDD V Output voltage “H” level VOH IOH=-0.5mA 0.8VDD - VDD V Output voltage “L” level VOL IOL=0.5mA VSS - 0.2VDD V Power supply voltage Power driving supply for LCD DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 3 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 4.0 OPTICAL CHARACTERISTICS (Ta=25ºC, Vdd= 5.0V±0.25V, FSTN LC fluid) DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 4 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 5 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 6 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 5.0 BLOCK DIAGRAM 6.0 PIN ASSIGNMENT Pin No. Symbol Function 1 /CS1 2 /RESET 3 RS 4 DB6(SCL) Serial clock input terminal 5 DB7(SI) Serial data input terminal 6 VDD Power supply 7 VSS Ground 8 V1 Power supply for the liquid crystal drive 9 V2 Power supply for the liquid crystal drive 10 V3 Power supply for the liquid crystal drive 11 V4 Power supply for the liquid crystal drive 12 V5 Power supply for the liquid crystal drive Chip select signal,active at low. Reset signal input Register select.H:Data code input; L:instruction code input. DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 7 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 7.0 APPLICATION CIRCUIT DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 8 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 8.0 TIMING CHARACTERISTICS DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 9 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 9.0 RESET TIMING CHARACTERISTICS DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 10 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 10.0 POWER ON/OFF SEQGUENCE Power on: Power off: DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 11 DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. LCD SPECIFICATION 132X64 DOTS A COM32 COM63 SILICONE IC:SPLC501C SILICONE TAPE SEG131 FRONT 12 BACK 1 COM0 COM31 V5 12 V4 11 V3 10 V2 9 V1 8 VSS 7 VDD 6 D7(SI) 5 D6(SCL) 4 RS 3 /RES 2 /CS1 1 PIN NO. SYMBOL XIAMEN ZETTLER ELECTRONICS CO., LTD. 1/1 DISPLAYTRONIC SEG0 A 10:1 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 11.0 MECHANICAL DIAGRAM 12 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 12.0 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS 13.0 RELIABILITY TEST DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 13 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 14.0 DISPLAY INSTRUCTION TABLE DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 14 AQM1364A-MLB-FTW CHARACTER MODULE VER1.0 Note: The character generator RAM is the RAM with which the user can rewrite character patterns by program. DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. 15